Dell S4148U-ON Open Networking Hardware Diagnostic Guide June 2018 - Page 83
CLI options, Outputtest output
![]() |
View all Dell S4148U-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
CLI options NOTE: Before using any commands, you must set the MUX settings to select the bus segments the temperature sensors are on. DellEmc Diag - Temperature Tool version 1.4, x.xx.x.x-x build, 2017/05/23, Syntax: temptool Show the help-text:= temptool --h (or) temptool -h Test the pre-programmed configuration:= temptool --test --config= [--lpc] (or) temptool -t -f [-l] Execute repeatedly command by count:= temptool --iteration=max/ [option1] [option2]...(or) temptool -I max/ [option1] [option2]... Show the current temperature-device values:= temptool --show --config= [--lpc] (or) temptool -x -f [-l] Usage:= -h, --h -t, --test -x, --show -f, --config= -I, --iteration= -q, --lpc Show the help text Test using the pre-programmed configuration or use supplied config Show operation To specify the location of the config file e.g. /etc/dn/diag/ Iteration command execution Use LPC interface for reading temperature LPC option MUST be used with show/test flags • test - Tests the sensors to make sure they are within the acceptable range. • show - Shows the current temperature values. Output test output root@dell-diag-os:/opt/dellemc/diag/bin# temptool --test --lpc Testing Temp sensor devices: Temperature Sensor 1 Passed Temperature Sensor 2 Passed Temperature Sensor 3 Passed Temperature Sensor 4 Passed Temperature Sensor 5 Passed Temperature Sensor 6 Passed Temperature Sensor 7 Passed Temperature Sensor 8 Passed Temperature Sensor 9 Passed Temp Sensors: Overall test results ----- >>> Passed root@dell-diag-os:/opt/dellemc/diag/bin# root@dell-diag-os:/opt/dellemc/diag/bin# temptool --show --lpc Temperature Sensor 1 temperature value is 30.3 C Temperature Sensor 2 temperature value is 23.1 C Temperature Sensor 3 temperature value is 22.2 C Temperature Sensor 4 temperature value is 26.0 C Temperature Sensor 5 temperature value is 21.8 C Temperature Sensor 6 temperature value is 22.0 C Temperature Sensor 7 temperature value is 23.5 C Dell EMC DAIG-OS tools 83
![](/manual_guide/products/dell-powerswitch-s4148uon-open-networking-hardware-diagnostic-guide-2018-e89cf48/83.png)