Dell S5212F-ON Open Networking Hardware Diagnostic Guide December 2021 - Page 21
Dell EMC DAIG-OS tools
View all Dell S5212F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
6 Dell EMC DAIG-OS tools This section describes how to use the Dell EMC diagnostics operating system (DIAG OS). The DIAG OS provides a suite of tools to help diagnose issues seen on the system, or to run a health check to ensure that the hardware is operating properly. Diagnostic tools The DIAG OS uses standard Linux drivers and contains the following tools that you can use to evaluate the health of your system. The tools are packaged for both the DIAG OS, which is a simple OS of the same kernel version, and small rootfs to support the tools and drivers. NOTE: By default, the system I/O modules are down. Power on the I/O modules or the Opticstool and NPUtool reports failures. For information about how to power on the I/O modules, see the Dell EMC PowerSwitch Installation Guide for your system at www.dell.com/support. Topics: • edatool • cpldupgradetool • cputool • eepromtool • ethtool • fantool • gpiotool • i2ctool • ipmitool • ledtool • lpctool • memtool • nputool • nvramtool • opticstool • pcitool • phytool • pltool • psutool • rtctool • smarttool • smbiostool • storagetool • smartctl • temptool • updatetool • Diagnostic package Dell EMC DAIG-OS tools 21