Dell S5212F-ON Open Networking Hardware Diagnostic Guide December 2021 - Page 25
cpldupgradetool, Verbose mode, Tests, CLI options
View all Dell S5212F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
+ Checking SFP+ 32 + Checking SFP+ 33 + Checking SFP+ 34 + Checking SFP+ 35 0x50 ..... Passed 0x50 ..... Passed 0x50 ..... Passed 0x50 ..... Verbose mode Use the following steps to enable and set the verbose level. 1. Set the Verbose level with a value of 0-3 using bits 4 and 5 of the EDA control reg (0x55). For example, to set the verbose level to 2, set bit 5-1 (5=1) and bit 4-0 (4=0). The value is written in hexadecimal. The xx10x1xx shows the bit positions of 2, 4&5, and bit 0 on the right. root@dellemc-diag-os:~# nvramtool --write --reg=0x55 --val=0x25 2. Enable Verbose mode by setting bit 2 of the same reg to 1. NOTE: If you disable Verbose mode, or bit 2 of reg 0x55 is set to 0, the default verbosity level is 0/zero. EDA control reg (0x55): ● 5:4-EDA Verbose Level = 0/1/2/3 or verbosity level 0, 1, 2, or 3 ● 3-EDA Extended Tests ● 2-EDA Verbose Mode = 0/1 (0=disabled; 1=enabled) ● 1-EDA stop on Error ● 0-EDA Enable NOTE: If you do not need the Verbose mode settings to persist through reboots, you can use the environment variable method to enable Verbose Mode. export VERB_LEVEL= To clear the environment variable, use the unset VERB_LEVEL command. cpldupgradetool The cpldupgradetool shows the CPLD version that is being used to upgrade the CPLD. NOTE: For newer platforms, such as the S5200-ON Series and Z9264F-ON, cpldupgradetool is replaced with the updatetool. Tests There are no defined tests with cpldupgradetool. CLI options root@dellemc-diag-os:~# cpldupgradetool DellEmc Diag - CPLD Upgrade Tool version 1.1, x.xx.x.x-x build, 2017/05/23, Syntax: cpldupgradetool Print the Help-Text:= cpldupgradetool --h cpldupgradetool -h Print the CPLD versions:= cpldupgradetool --cpldver cpldupgradetool -c (or) (or) Dell EMC DAIG-OS tools 25