Dell S5212F-ON Open Networking Hardware Diagnostic Guide December 2021 - Page 80
updatetool, Output, test output, Tests
View all Dell S5212F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
temptool -I max/ [option1] [option2]... Show the current temperature-device values:= temptool --show --config= [--lpc] temptool -x -f [-l] (or) Usage:= -h, --h Show the help text -t, --test Test using the pre-programmed configuration or use supplied config -x, --show Show operation -f, --config= To specify the location of the config file e.g. /etc/dn/diag/ -I, --iteration= Iteration command execution -q, --lpc Use LPC interface for reading temperature LPC option MUST be used with show/test flags ● test - Tests the sensors to make sure they are within the acceptable range. ● show - Shows the current temperature values. Output test output root@dell-diag-os:/opt/dellemc/diag/bin# temptool --test --lpc Testing Temp sensor devices: Temperature Sensor 1 Passed Temperature Sensor 2 Passed Temperature Sensor 3 Passed Temperature Sensor 4 Passed Temperature Sensor 5 Passed Temperature Sensor 6 Passed Temperature Sensor 7 Passed Temperature Sensor 8 Passed Temperature Sensor 9 Passed Temp Sensors: Overall test results ----- >>> Passed root@dell-diag-os:/opt/dellemc/diag/bin# root@dell-diag-os:/opt/dellemc/diag/bin# temptool --show --lpc Temperature Sensor 1 temperature value is 30.3 C Temperature Sensor 2 temperature value is 23.1 C Temperature Sensor 3 temperature value is 22.2 C Temperature Sensor 4 temperature value is 26.0 C Temperature Sensor 5 temperature value is 21.8 C Temperature Sensor 6 temperature value is 22.0 C Temperature Sensor 7 temperature value is 23.5 C Temperature Sensor 8 temperature value is 31.0 C Temperature Sensor 9 temperature value is 42.0 C root@dell-diag-os:/opt/dellemc/diag/bin# updatetool The updatetool shows the CPLD, FPGA, BMC, and BIOS versions used to upgrade the CPLD, FPGA, BMC, and BIOS. NOTE: For older platforms, such as the S4100-ON Series, updatetool is not available. Instead use cpldupgradetool. Tests There are no defined tests with updatetool. 80 Dell EMC DAIG-OS tools