Dell U2417HA User Guide - Page 9
Bottom View, Connecting the, Monitor for DP MST Function
View all Dell U2417HA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Bottom View Label 1 2 3 4 5 6 7 8 9 Description Use AC power connector To connect the monitor power cable. HDMI/MHL connector Connect your computer with HDMI cable or MHL devices with MHL cable (optional). DP connector (in) Connect your computer with DP cable. mDP connector (in) Connect your computer with mDP to DP cable. DP connector (out) DP output for MST (multi-stream transport) capable monitor. DP 1.1 monitor can only be connected as the last monitor in the MST chain. To enable MST, refer to instruction on section "Connecting the Monitor for DP MST Function". NOTE: Remove the rubber plug when use DP out connector. Audio line-out port Connect speakers to playback audio coming through HDMI or DP audio channels. Only supports 2-channel audio. NOTE: The audio line-out port does not support headphones. USB upstream port WARNING: Excessive sound pressure from earphones or headphones can cause hearing damage or loss. Connect the USB cable that comes with your monitor to the computer. Once this cable is connected, you can use the USB downstream connectors on the monitor. USB downstream ports (2) Connect your USB device. You can only use this connector after you have connected the USB cable to the computer and USB upstream connector on the monitor. Arm lock Lock the arm to the monitor using a M3 x 6 mm screw (screw not included). About Your Monitor | 9