Dell Vostro 13 Service Manual - Page 14

Internal Card With Bluetooth, Wireless Technology - vostro v13 hard drive

Page 14 highlights

Back to Contents Page Internal Card With Bluetooth® Wireless Technology Dell™ Vostro™ V13 Service Manual WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. Removing the Bluetooth Card NOTE: You may need to install Adobe® Flash® Player from Adobe.com in order to view the illustrations below. 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the ExpressCard, if applicable. 3. Remove the SD card, if applicable. 4. Remove the base cover. 5. Remove the battery. 6. Remove the hard drive and audio board. 7. Remove the WLAN card. 8. Remove the LCD cover. 9. Remove the memory. 10. Remove the keyboard. 11. Remove the card reader. 12. Remove the coin-cell battery. 13. Remove the system board. 14. Remove the screw that secures the Bluetooth card to the system board. 15. Lift the Bluetooth card up and away from the system board. Replacing the Bluetooth Card To replace the Bluetooth card, perform the above steps in reverse order. Back to Contents Page

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

Back to Contents Page
Internal Card With Bluetooth
®
Wireless Technology
Dell™ Vostro™ V13 Service Manual
Removing the Bluetooth Card
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the
ExpressCard
, if applicable.
3.
Remove the
SD card
, if applicable.
4.
Remove the
base cover
.
5.
Remove the
battery
.
6.
Remove the
hard drive and audio board
.
7.
Remove the
WLAN card
.
8.
Remove the
LCD cover
.
9.
Remove the
memory
.
10.
Remove the
keyboard
.
11.
Remove the
card reader
.
12.
Remove the
coin
-
cell battery
.
13.
Remove the
system board
.
14.
Remove the screw that secures the Bluetooth card to the system board.
15.
Lift the Bluetooth card up and away from the system board.
Replacing the Bluetooth Card
To replace the Bluetooth card, perform the above steps in reverse order.
Back to Contents Page
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTE:
You may need to install Adobe
®
Flash
®
Player from
Adobe.com
in order to view the illustrations below.