Dell Vostro 270 Owner's Manual - Page 21
Installing the I/O Panel, Removing the Processor
View all Dell Vostro 270 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Installing the I/O Panel 1. Place the I/O panel at it's location on the computer. 2. Replace the screw to secure the I/O panel to the computer. 3. Route the cables through the metal clips. 4. Replace the cover. 5. Follow the procedures in After Working Inside Your Computer. Removing the Processor 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the cover. 3. Disconnect the heat sink and fan-assembly cable from the system board. 4. Loosen the captive screws that secures the heat sink and fan assembly to the system board. 21
Installing the I/O Panel
1.
Place the I/O panel at it's location on the computer.
2.
Replace the screw to secure the I/O panel to the computer.
3.
Route the cables through the metal clips.
4.
Replace the cover.
5.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Processor
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the cover.
3.
Disconnect the heat sink and fan-assembly cable from the system board.
4.
Loosen the captive screws that secures the heat sink and fan assembly to the system board.
21