Dell Vostro 3582 Service Manual with optical drive - Page 27

M2. SATA Solid State Drive (SSD), Removing the M.2 2280 solid state drive

Get Dell Vostro 3582 PDF manuals and user guides View all Dell Vostro 3582 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 27 highlights

Next steps 1. Install the battery. 2. Install the base cover. 3. Install the optical drive. 4. Install the SD card. 5. Follow the procedures in After working inside your computer. M2. SATA Solid State Drive (SSD) Removing the M.2 2280 solid state drive Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the SD card. 3. Remove the optical drive. 4. Remove the base cover. 5. Remove the battery Steps 1. Loosen the captive screws that secure the SSD thermal plate and solid-state drive to the palm rest and keyboard assembly [1]. 2. Remove the single (M2x3) screw that secures the SSD to the system [2]. 3. Lift the SSD thermal plate from its connector and lift it off the system [3]. 4. Pull the SSD thermal plate from its connector on the system board. [4] Removing and installing components 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
Next steps
1.
Install the
battery
.
2.
Install the
base cover
.
3.
Install the
optical drive
.
4.
Install the
SD card
.
5.
Follow the procedures in
After working inside your computer
.
M2. SATA Solid State Drive (SSD)
Removing the M.2 2280 solid state drive
Prerequisites
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the
SD card
.
3.
Remove the
optical drive
.
4.
Remove the
base cover
.
5.
Remove the
battery
Steps
1.
Loosen the captive screws that secure the SSD thermal plate and solid-state drive to the palm rest and keyboard assembly [1].
2.
Remove the single (M2x3) screw that secures the SSD to the system [2].
3.
Lift the SSD thermal plate from its connector and lift it off the system [3].
4.
Pull the SSD thermal plate from its connector on the system board. [4]
Removing and installing components
27