Dell Vostro 3582 Service Manual with optical drive - Page 32
I/O board, Removing the I/O board, Installing the IO board
View all Dell Vostro 3582 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
I/O board Removing the I/O board Steps 1. Open the latch and disconnect the I/O-board cable from the system board [1]. 2. Remove the screw (M2x4) that secures the I/O board to the palm rest and keyboard assembly [2]. 3. Lift the I/O board off the palm rest and keyboard assembly [3]. Installing the IO board Steps 1. Using the alignment posts, place the I/O board on the palm rest and keyboard assembly [1]. 2. Replace the screw (M2x4) that secures the I/O board to the palm rest and keyboard assembly [2]. 3. Connect the IO board cable to its connector on the system board [3]. 32 Removing and installing components
I/O board
Removing the I/O board
Steps
1.
Open the latch and disconnect the I/O-board cable from the system board [1].
2.
Remove the screw (M2x4) that secures the I/O board to the palm rest and keyboard assembly [2].
3.
Lift the I/O board off the palm rest and keyboard assembly [3].
Installing the IO board
Steps
1.
Using the alignment posts, place the I/O board on the palm rest and keyboard assembly [1].
2.
Replace the screw (M2x4) that secures the I/O board to the palm rest and keyboard assembly [2].
3.
Connect the IO board cable to its connector on the system board [3].
32
Removing and installing components