Dell Vostro 3582 Service Manual with optical drive - Page 51

Display assembly, Removing the display assembly

Get Dell Vostro 3582 PDF manuals and user guides View all Dell Vostro 3582 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 51 highlights

Next steps 1. Install the M.2 SSD card. 2. Install the battery. 3. Install the base cover. 4. Install the optical drive. 5. Install the SD card. 6. Follow the procedures in After working inside your computer. Display assembly Removing the display assembly Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the SD card. 3. Remove the optical drive. 4. Remove the base cover. 5. Remove the battery. 6. Remove the WLAN card. Steps 1. Lift the latch and disconnect the optical-drive connector-board cable from the system board [1]. 2. Open the latch and disconnect the display cable from the system board [2]. 3. Unroute the display cable from the routing channel on the system [3]. 4. Unroute the wireless cables from the routing clips [4]. Removing and installing components 51

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
Next steps
1.
Install the
M.2 SSD card
.
2.
Install the
battery
.
3.
Install the
base cover
.
4.
Install the
optical drive
.
5.
Install the
SD card
.
6.
Follow the procedures in
After working inside your computer
.
Display assembly
Removing the display assembly
Prerequisites
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the
SD card
.
3.
Remove the
optical drive
.
4.
Remove the
base cover
.
5.
Remove the
battery
.
6.
Remove the
WLAN card
.
Steps
1.
Lift the latch and disconnect the optical-drive connector-board cable from the system board [1].
2.
Open the latch and disconnect the display cable from the system board [2].
3.
Unroute the display cable from the routing channel on the system [3].
4.
Unroute the wireless cables from the routing clips [4].
Removing and installing components
51