Dell Vostro 3582 Service Manual with optical drive - Page 42

Installing the WLAN card

Get Dell Vostro 3582 PDF manuals and user guides View all Dell Vostro 3582 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 42 highlights

4. Remove the base cover. 5. Remove the battery Steps 1. Remove the M2x3 screw that secures the WLAN bracket to the system [1]. 2. Lift the WLAN bracket from the system [2]. 3. Disconnect the WLAN antenna cables from the connectors on the WLAN card [3]. 4. Pull the WLAN card from the connector on the system board [4]. Installing the WLAN card About this task CAUTION: To avoid damage to the WLAN card, do not place any cables under it. Steps 1. Insert the WLAN card into the connector on the system board [1]. 2. Connect the WLAN cables to the connectors on the WLAN card [2]. 3. Place the WLAN card bracket to secure the WLAN cables [3]. 4. Replace the M2x3 screw to secure the WLAN bracket to the WLAN card [4]. 42 Removing and installing components

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
4.
Remove the
base cover
.
5.
Remove the
battery
Steps
1.
Remove the M2x3 screw that secures the WLAN bracket to the system [1].
2.
Lift the WLAN bracket from the system [2].
3.
Disconnect the WLAN antenna cables from the connectors on the WLAN card [3].
4.
Pull the WLAN card from the connector on the system board [4].
Installing the WLAN card
About this task
CAUTION:
To avoid damage to the WLAN card, do not place any cables under it.
Steps
1.
Insert the WLAN card into the connector on the system board [1].
2.
Connect the WLAN cables to the connectors on the WLAN card [2].
3.
Place the WLAN card bracket to secure the WLAN cables [3].
4.
Replace the M2x3 screw to secure the WLAN bracket to the WLAN card [4].
42
Removing and installing components