Dell Vostro 3582 Service Manual with optical drive - Page 55
System board, Removing the system board
![]() |
View all Dell Vostro 3582 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
6. Connect the optical-drive connector-board cable to the system board [2]. 7. Connect the display cable to the system board [3]. 8. Route the wireless cable through the routing clips [4] Next steps 1. Install the display assembly. 2. Install the thermal pad. 3. Install the WLAN card. 4. Install the battery. 5. Install the base cover. 6. Install the optical drive. 7. Install the SD card. 8. Follow the procedures in After working inside your computer. System board Removing the system board Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the SD card. 3. Remove the optical drive. 4. Remove the base cover. 5. Remove the battery 6. Remove the WLAN card 7. Remove the thermal plate 8. Remove the display assembly Removing and installing components 55
![](/manual_guide/products/dell-vostro-3582-service-manual-optical-drive-4db2612/55.png)