Dell Vostro 3582 Service Manual with optical drive - Page 63

Camera, Removing the camera

Page 63 highlights

Next steps 1. Install the display assembly. 2. Install the WLAN card. 3. Install the battery. 4. Install the base cover. 5. Install the optical drive. 6. Install the SD card. 7. Follow the procedures in After working inside your computer. Camera Removing the camera Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the SD card. 3. Remove the optical drive. 4. Remove the base cover. 5. Remove the battery 6. Remove the WLAN card 7. Remove the thermal plate 8. Remove the display assembly 9. Remove the display bezel Steps 1. Using a plastic scribe, gently pry the camera off the display back-cover and antenna assembly [1]. 2. Disconnect the camera cable from the camera module [2]. Removing and installing components 63

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86

Next steps
1.
Install the
display assembly
.
2.
Install the
WLAN card
.
3.
Install the
battery
.
4.
Install the
base cover
.
5.
Install the
optical drive
.
6.
Install the
SD card
.
7.
Follow the procedures in
After working inside your computer
.
Camera
Removing the camera
Prerequisites
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the
SD card
.
3.
Remove the
optical drive
.
4.
Remove the
base cover
.
5.
Remove the
battery
6.
Remove the
WLAN card
7.
Remove the
thermal plate
8.
Remove the
display assembly
9.
Remove the
display bezel
Steps
1.
Using a plastic scribe, gently pry the camera off the display back-cover and antenna assembly [1].
2.
Disconnect the camera cable from the camera module [2].
Removing and installing components
63