Dell Vostro 470 Owner's Manual - Page 57
System Message, USB over current error - monitor
View all Dell Vostro 470 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
System Message Hard-disk drive read failure Keyboard failure No boot device available Description Possible hard disk drive failure during HDD boot test. Keyboard failure or loose cable. If re-seating the cable does not solve the problem, replace the keyboard No bootable partition on hard disk drive, the hard disk drive cable is loose, or no bootable device exists. • If the hard drive is your boot device, ensure that the cables are connected and that the drive is installed properly and partitioned as a boot device. • Enter system setup and ensure that the boot sequence information is correct. No timer tick interrupt A chip on the system board might be malfunctioning or motherboard failure. USB over current error Disconnect the USB device. The USB device needs more power for it to function properly. Use an external power source to connect the USB device, or if the device has two USB cables, connect both of them. CAUTION - Hard Drive SELF MONITORING SYSTEM has reported that a parameter has exceeded its normal operating range. Dell recommends that you back up your data regularly. A parameter out of range may or may not indicate a potential hard drive problem S.M.A.R.T error, possible hard disk drive failure. 57