Dell Vostro 5590 Service Manual - Page 15

Installing the battery, Memory modules, Removing the secondary memory module

Get Dell Vostro 5590 PDF manuals and user guides View all Dell Vostro 5590 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 15 highlights

Installing the battery Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. About this task The figure indicates the location of the battery and provides a visual representation of the installation procedure. Steps 1. Place the battery on the palmrest and align the screw holes on the battery with the screw holes on the palmrest. 2. Replace the four (M2x3) screws to secure the battery to the palmrest. 3. Connect the battery cable to the connector on the system board. Next steps 1. Install the base cover. 2. Follow the procedure in After working inside your computer. Memory modules Removing the secondary memory module Prerequisites NOTE: Primary memory module is integrated into the system board. Removing and installing components 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
Installing the battery
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The figure indicates the location of the battery and provides a visual representation of the installation procedure.
Steps
1.
Place the battery on the palmrest and align the screw holes on the battery with the screw holes on the palmrest.
2.
Replace the four (M2x3) screws to secure the battery to the palmrest.
3.
Connect the battery cable to the connector on the system board.
Next steps
1.
Install the
base cover
.
2.
Follow the procedure in
After working inside your computer
.
Memory modules
Removing the secondary memory module
Prerequisites
NOTE:
Primary memory module is integrated into the system board.
Removing and installing components
15