Dell Vostro 5590 Service Manual - Page 39
Installing the system fan
![]() |
View all Dell Vostro 5590 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Steps 1. Lift the latch and disconnect the input and output board cable from the connector on the system board. 2. Unroute the input and output board cable from the retention clips. 3. Disconnect the system fan cable from the connector on the system board. 4. Remove the two (M2x3) screws that secure the system fan to the palmrest assembly. 5. Lift the system fan off the palmrest assembly. Installing the system fan Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. About this task The figure indicates the location of the system fan and provides a visual representation of the installation procedure. Removing and installing components 39
![](/manual_guide/products/dell-vostro-5590-service-manual-faf4f5e/39.png)
Steps
1.
Lift the latch and disconnect the input and output board cable from the connector on the system board.
2.
Unroute the input and output board cable from the retention clips.
3.
Disconnect the system fan cable from the connector on the system board.
4.
Remove the two (M2x3) screws that secure the system fan to the palmrest assembly.
5.
Lift the system fan off the palmrest assembly.
Installing the system fan
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The figure indicates the location of the system fan and provides a visual representation of the installation procedure.
Removing and installing components
39