Dell Vostro 5590 Service Manual - Page 40
the system board., Follow the procedure
![]() |
View all Dell Vostro 5590 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Steps 1. Locate the system fan slot on your computer. 2. Align and place the system fan into the slot on the palmrest assembly. 3. Replace the two (M2x3) screws to secure the system fan to the palmrest assembly. 4. Connect the system fan cable to the connector on the system board. 5. Route the input and output board cable through the retention clip and connect the input and output board cable to the connector on the system board. Next steps 1. Install the battery. 2. Install the base cover. 3. Follow the procedure in After working inside your computer. 40 Removing and installing components
![](/manual_guide/products/dell-vostro-5590-service-manual-faf4f5e/40.png)
Steps
1.
Locate the system fan slot on your computer.
2.
Align and place the system fan into the slot on the palmrest assembly.
3.
Replace the two (M2x3) screws to secure the system fan to the palmrest assembly.
4.
Connect the system fan cable to the connector on the system board.
5.
Route the input and output board cable through the retention clip and connect the input and output board cable to the connector on
the system board.
Next steps
1.
Install the
battery
.
2.
Install the
base cover
.
3.
Follow the procedure in
After working inside your computer
.
40
Removing and installing components