Dell Vostro 5590 Service Manual - Page 61

Palmrest assembly, Replacing the palmrest assembly

Get Dell Vostro 5590 PDF manuals and user guides View all Dell Vostro 5590 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 61 highlights

Steps 1. Place the display assembly on a clean and flat surface. 2. Align and place the palmrest and keyboard assembly on the display assembly. 3. Using the alignment posts, close the left and right display hinges. 4. Replace the four (M2.5x2.5 (Big head)) screws and two (M2x3) screws to secure the left and right display hinges to the chassis of the computer. 5. Connect the display cable to the system board and adhere the tape to secure the display cable. Next steps 1. Install the system fan. 2. Install the battery. 3. Install the base cover. 4. Follow the procedure in After working inside your computer. Palmrest assembly Replacing the palmrest assembly Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the battery. 4. Remove the hard drive. 5. Remove the coin-cell battery. Removing and installing components 61

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
Steps
1.
Place the display assembly on a clean and flat surface.
2.
Align and place the palmrest and keyboard assembly on the display assembly.
3.
Using the alignment posts, close the left and right display hinges.
4.
Replace the four (M2.5x2.5 (Big head)) screws and two (M2x3) screws to secure the left and right display hinges to the chassis of
the computer.
5.
Connect the display cable to the system board and adhere the tape to secure the display cable.
Next steps
1.
Install the
system fan
.
2.
Install the
battery
.
3.
Install the
base cover
.
4.
Follow the procedure in
After working inside your computer
.
Palmrest assembly
Replacing the palmrest assembly
Prerequisites
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the
base cover
.
3.
Remove the
battery
.
4.
Remove the
hard drive
.
5.
Remove the
coin-cell battery
.
Removing and installing components
61