Dell Vostro 7500 Service Manual - Page 12
Disassembly and reassembly, Recommended tools, Screw list
![]() |
View all Dell Vostro 7500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
3 Disassembly and reassembly Recommended tools The procedures in this document may require the following tools: • Phillips #0 screwdriver • Phillips #1 screwdriver • Plastic scribe (recommended for field technicians) NOTE: The #0 screw driver is for screws 0-1, and the #1 screw driver is for screws 2-4. Screw list NOTE: When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is restored when the component is replaced. NOTE: Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surface when replacing a component. NOTE: Screw color may vary with the configuration ordered. Table 1. Screw list Component Base cover Screw type M2x4 M2x7.5 - captive Quantity 7 2 Screw image Six-cell battery M2x5 8 WLAN M2x3 1 Solid-state drive - 1 M2x3 1 Solid-state drive - 2 M2x3 1 GPU fan M2x4 2 System fan M2x4 2 Heat sink - UMA M2x3 - captive 4 Heat sink - discrete M2x3 - captive 7 12 Disassembly and reassembly
![](/manual_guide/products/dell-vostro-7500-service-manual-3d6f6f9/12.png)