Dell Vostro 7500 Service Manual - Page 40
Installing the coin-cell battery
![]() |
View all Dell Vostro 7500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
2. Remove the base cover. 3. Remove the battery. NOTE: Removing the coin-cell battery resets the BIOS setup program settings to default. It is recommended that you note the BIOS setup program settings before removing the coin-cell battery. The system does not boot to the operating system if settings are not saved. About this task The figure indicates the location of the coin-cell battery and provides a visual representation of the removal procedure. Steps 1. Disconnect the coin-cell battery cable from the I/O board. 2. Peel the coin-cell battery off the palm-rest and keyboard assembly. Installing the coin-cell battery Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. About this task The figure indicates the location of the coin-cell battery and provides a visual representation of the installation procedure. 40 Disassembly and reassembly
![](/manual_guide/products/dell-vostro-7500-service-manual-3d6f6f9/40.png)