Dell Vostro 7500 Service Manual - Page 59

M.2 2280 or M.2 2230., Adhere the tape that secures the display cable to the system board.

Get Dell Vostro 7500 PDF manuals and user guides View all Dell Vostro 7500 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 59 highlights

Steps 1. Slide the ports on the system board into the slots on the palm-rest and keyboard assembly and align the screw holes on the system board with the screw holes on the palm-rest and keyboard assembly. 2. Replace the two screws (M2x3) that secure the system board to the palm-rest and keyboard assembly. 3. Align and place the USB Type-C port bracket. 4. Replace the two screws (M2x3) that secure the USB Type-C port bracket to the system board. 5. Connect the I/O-board cable to the system board and close the latch to secure the cable. 6. Connect the speaker cable to the system board. 7. Connect the touchpad cable to the system board and close the latch to secure the cable. 8. Connect the keyboard-backlight cable to the system board and close the latch to secure the cable. 9. Connect the display cable on to the connector on the system board. 10. Adhere the tape that secures the display cable to the system board. 11. Lower the right display hinge, and replace two screws (M2.5x5) and (M2.5x4). Next steps 1. Install the memory module. 2. Install the heat sink - discrete or UMA based on the configuration selected. 3. Install the GPU fan. 4. Install the system fan. 5. Install the WLAN card. 6. Install the SSD-1 (M.2 2280 or M.2 2230). 7. Install the SSD-2 (M.2 2280 or M.2 2230). 8. Install the battery. 9. Install the base cover. 10. Follow the procedure in after working inside your computer. Disassembly and reassembly 59

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
Steps
1.
Slide the ports on the system board into the slots on the palm-rest and keyboard assembly and align the screw holes on the system
board with the screw holes on the palm-rest and keyboard assembly.
2.
Replace the two screws (M2x3) that secure the system board to the palm-rest and keyboard assembly.
3.
Align and place the USB Type-C port bracket.
4.
Replace the two screws (M2x3) that secure the USB Type-C port bracket to the system board.
5.
Connect the I/O-board cable to the system board and close the latch to secure the cable.
6.
Connect the speaker cable to the system board.
7.
Connect the touchpad cable to the system board and close the latch to secure the cable.
8.
Connect the keyboard-backlight cable to the system board and close the latch to secure the cable.
9.
Connect the display cable on to the connector on the system board.
10.
Adhere the tape that secures the display cable to the system board.
11.
Lower the right display hinge, and replace two screws (M2.5x5) and (M2.5x4).
Next steps
1.
Install the
memory module
.
2.
Install the heat sink -
discrete
or
UMA
based on the configuration selected.
3.
Install the
GPU fan
.
4.
Install the
system fan
.
5.
Install the
WLAN card
.
6.
Install the
SSD-1
(M.2 2280 or M.2 2230).
7.
Install the
SSD-2
(M.2 2280 or M.2 2230).
8.
Install the
battery
.
9.
Install the
base cover
.
10.
Follow the procedure in
after working inside your computer
.
Disassembly and reassembly
59