Dell Vostro 7500 Service Manual - Page 35
Heat sink, Removing the heat sink - UMA
View all Dell Vostro 7500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Steps 1. Slide and place the system fan on the palm-rest and keyboard assembly. 2. Align the screw holes on the system fan with the screw holes on the palm-rest and keyboard assembly. 3. Replace the two (M2x4) screws to secure the system fan to the palm-rest and keyboard assembly. 4. Connect the system fan cable to the system board. Next steps 1. Install the battery. 2. Install the base cover. 3. Follow the procedure in after working inside your computer. Heat sink Removing the heat sink - UMA Prerequisites NOTE: The heat sink type in your computer varies depending on the configuration ordered. 1. Follow the procedure in before working inside your computer. 2. Remove the base cover. 3. Remove the battery. About this task The figure indicates the location of the heat sink and provides a visual representation of the removal procedure. Disassembly and reassembly 35