Dell Vostro 7500 Service Manual - Page 55

Connect the display cable on to the connector on the system board and adhere the tape to the system board.

Get Dell Vostro 7500 PDF manuals and user guides View all Dell Vostro 7500 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 55 highlights

Steps 1. Place the display assembly on a clean and flat surface. 2. Align and place the palm-rest and keyboard assembly on the display assembly. 3. Using the alignment posts, close the display hinges. 4. Replace the two screws (M2.5x5) and (M2.5x4) that secure the left-display hinge to the system board. 5. Replace the two screws (M2.5x5) and (M2.5x4) that secure the right-display hinge to the system board. 6. Connect the display cable on to the connector on the system board and adhere the tape to the system board. Next steps 1. Install the battery. 2. Install the base cover. 3. Follow the procedure in after working inside your computer. Disassembly and reassembly 55

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
Steps
1.
Place the display assembly on a clean and flat surface.
2.
Align and place the palm-rest and keyboard assembly on the display assembly.
3.
Using the alignment posts, close the display hinges.
4.
Replace the two screws (M2.5x5) and (M2.5x4) that secure the left-display hinge to the system board.
5.
Replace the two screws (M2.5x5) and (M2.5x4) that secure the right-display hinge to the system board.
6.
Connect the display cable on to the connector on the system board and adhere the tape to the system board.
Next steps
1.
Install the
battery
.
2.
Install the
base cover
.
3.
Follow the procedure in
after working inside your computer
.
Disassembly and reassembly
55