Dell Vostro 7500 Service Manual - Page 23
Solid-state drive, Removing the M.2 2280 solid-state drive - SSD-1
![]() |
View all Dell Vostro 7500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Next steps 1. Connect the battery. 2. Install the base cover. 3. Follow the procedure in after working inside your computer. Solid-state drive Removing the M.2 2280 solid-state drive - SSD-1 Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the base cover. 3. Disconnect the battery . About this task The figure indicates the location of the solid-state drive and provides a visual representation of the removal procedure of M.2 2280 SSD from slot 1. Steps 1. Remove the single screw (M2x3) that secures the solid-state drive module shield to the palm-rest and keyboard assembly. 2. Lift and remove the solid-state drive module shield from the solid-state drive slot. 3. Slide and remove the solid-state drive module from the solid-state drive slot. Installing the M.2 2280 solid-state drive - SSD-1 Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. About this task The figure indicates the location of the solid-state drive bracket and provides a visual representation of the bracket alignment procedure to accommodate the M.2 2280 solid-state drive in slot 1. Disassembly and reassembly 23
![](/manual_guide/products/dell-vostro-7500-service-manual-3d6f6f9/23.png)