Dell Vostro 7500 Service Manual - Page 43

Lower the left-display hinge.

Get Dell Vostro 7500 PDF manuals and user guides View all Dell Vostro 7500 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 43 highlights

Steps 1. Place the I/O board on the palm-rest and keyboard assembly. 2. Align the screw holes on the I/O board with the screw holes on the palm-rest and keyboard assembly. 3. Replace the single screw (M2x3) that secure the I/O board to the palm-rest and keyboard assembly. 4. Connect the USH cable (optional) to the I/O board and close the latch to secure the cable. 5. Connect the coin-cell battery cable to the I/O board and adhere the coin-cell battery. 6. Connect the I/O-board cable to the I/O board and close the latch to secure the cable. 7. Lower the left-display hinge. 8. Replace the two screws (M2.5x5) and (M2.5x4) that secure the I/O board to the palm-rest and keyboard assembly. Next steps 1. Install the GPU fan. 2. Install the battery. 3. Install the base cover. 4. Follow the procedure in after working inside your computer. Disassembly and reassembly 43

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
Steps
1.
Place the I/O board on the palm-rest and keyboard assembly.
2.
Align the screw holes on the I/O board with the screw holes on the palm-rest and keyboard assembly.
3.
Replace the single screw (M2x3) that secure the I/O board to the palm-rest and keyboard assembly.
4.
Connect the USH cable (optional) to the I/O board and close the latch to secure the cable.
5.
Connect the coin-cell battery cable to the I/O board and adhere the coin-cell battery.
6.
Connect the I/O-board cable to the I/O board and close the latch to secure the cable.
7.
Lower the left-display hinge.
8.
Replace the two screws (M2.5x5) and (M2.5x4) that secure the I/O board to the palm-rest and keyboard assembly.
Next steps
1.
Install the
GPU fan
.
2.
Install the
battery
.
3.
Install the
base cover
.
4.
Follow the procedure in
after working inside your computer
.
Disassembly and reassembly
43