Dell XPS 17 9730 Service Manual - Page 9
Removing and installing components, Recommended tools, Screw list
View all Dell XPS 17 9730 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
2 Removing and installing components NOTE: The images in this document may differ from your computer depending on the configuration you ordered. Recommended tools The procedures in this document may require the following tools: ● Phillips screwdriver #0 ● Phillips screwdriver #1 ● Torx #5 (T5) screwdriver ● Plastic scribe Screw list NOTE: When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is restored when the component is replaced. NOTE: Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surfaces when replacing a component. NOTE: Screw color may vary with the configuration ordered. Table 1. Screw list Component Base cover Screw type M2x4 Quantity 8 Screw image Battery M2x4 7 Solid-state drives M2x4 2 Right fan M2x4 2 Left fan M1.6x4 1 M2x4 2 Heat sink M1.6x4 1 M2.5x5 7 Removing and installing components 9