Dell XPS 710 H2C Owner's Manual - Page 114
CD/DVD Drive
View all Dell XPS 710 H2C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
book.book Page 114 Friday, October 27, 2006 4:02 PM 8 Check all cable connections and fold cables out of the way to avoid blocking airflow between the fan and cooling vents. 9 Replace the drive panel (see "Replacing the Drive Panel" on page 106). 10 Replace the computer cover (see "Replacing the Computer Cover" on page 127). NOTICE: To connect a network cable, first plug the cable in to the network port or device and then plug it in to the computer. 11 Connect your computer and devices to their electrical outlets, and turn them on. See the documentation that came with the drive for instructions on installing any software required for drive operation. 12 Enter system setup (see "Entering System Setup" on page 134) and select the appropriate USB for FlexBay option. CD/DVD Drive CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. Removing a CD/DVD Drive 1 Follow the procedures in "Before You Begin" on page 75. 2 Remove the computer cover (see "Removing the Computer Cover" on page 76). 3 Remove the drive panel (see "Removing the Drive Panel" on page 105). 4 Disconnect the power and data cables from the back of the drive. NOTE: If you are uninstalling your only CD/DVD drive and will not replace it at this time, disconnect the data cable from the system board and set it aside. 114 Removing and Installing Parts