Dell XPS 710 H2C Owner's Manual - Page 121
Installing the Liquid Cooling Assembly
View all Dell XPS 710 H2C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
book.book Page 121 Friday, October 27, 2006 4:02 PM 1 2 3 1 liquid cooling assembly 2 captive screws (6) 3 screw (loose) Installing the Liquid Cooling Assembly 1 Follow the procedures in "Before You Begin" on page 75. 2 Remove the computer cover (see "Removing the Computer Cover" on page 76). NOTICE: Ensure that adequate thermal grease is applied to the top of the processor. Thermal grease is critical for ensuring adequate thermal bonding, which is a requirement for optimal processor operation. 3 Apply thermal grease to the top of the processor, as needed. 4 Align the screw holes on the liquid cooling assembly with the holes on the base of the computer, then tighten the seven screws to secure the assembly. 5 Connect the fan cable to the FAN1_CPU connector on the system board (see "System Board Components" on page 79). 6 Connect the liquid cooling assembly cable to the TEC_PUMP connector on the system board (see "System Board Components" on page 79). 7 Connect the liquid cooling assembly power cable. Removing and Installing Parts 121