Denon AVR-3801 Owners Manual - Page 17

7 SETTING UP THE SYSTEM • Once all connections with other AV components have been completed as described in "CONNECTIONS" (see pages 6 to 13), make the various settings described below on the monitor screen using the AVR-3801's on-screen display function. These settings are required to set up the listening room's AV system centered around the AVR-3801. • Use the following buttons to set up the system: SYSTEM SETUP button Press this to display the system setup menu. DISPLAY SURR. PARA. SETUP TUNING MENU OSD RETURN A/B MEMORY BAND MODE CHANNEL VOLUME TUNING + + SKIP ENTER - SKIP TUNER SHIFT MUTING PHONO - CD CURSOR buttons F and G: Use these to move the cursors (F and G) to the left and right on the screen. D and H: Use these to move the cursors (D and H) to the up and down on the screen. ENTER button Press this to switch the display. Also use this button to complete the setting. • System setup items and default values (set upon shipment from the factory) System setup q Power AMP Assignment Set this to switch the surround back channel's power amplifier for use for multi-zone. Speaker Configuration Input the combination of speakers in your system and their corresponding sizes (SMALL for regular speakers, LARGE for fullsize, full-range) to automatically set the composition of the signals output from the speakers and the frequency response. w (Surround Speaker Setting) Use this function when using multiple surround speaker combinations for more ideal surround sound. Once the combinations of surround speakers to be used for the different surround modes are preset, the surround speakers are selected automatically according to the surround mode. Surround mode Surround speaker (Subwoofer mode) This selects the subwoofer speaker for playing deep bass signals. Front Sp. Large DOLBY/ DTS SURROUND A Default settings Surround Back Center Sp. Small Surround Sp. A / B Small Surround Back Sp. Small / 2spkrs Sub Woofer Yes 5CH/7CH STEREO DSP SIMULATION EXT. IN - - A A A - - LFE e DTS-ES/6.1 Source Auto r Delay Time t Channel Level y Digital In Assignment u Multi vol. Level Set the method of playing the surround back channel for digital signals. This parameter is for optimizing the timing with which the audio signals are produced from the speakers and subwoofer according to the listening position. This adjusts the volume of the signals output from the speakers and subwoofer for the different channels in order to obtain optimum effects. This assigns the digital input jacks for the different input sources. Input source Digital Inputs DTS-ES / 6.1 Source Auto = OFF Front L & R Center Surround L & R SBL & SBR 12 ft (3.6 m) 12 ft (3.6 m) 10 ft (3.0 m) 10 ft (3.0 m) Front L Front R Center Surround Surround Surround Surround L R Back L Back R 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB CD DVD VDP TAPE TV/DBS VCR-1 VCR-2 COAXIAL OPTICAL 1 OPTICAL 2 OPTICAL 3 OFF OFF OFF Sub Woofer 12 ft (3.6 m) Subwoofer 0 dB - - - - This sets the output level for the mult output jacks. 0 dB i On Screen Display This sets whether or not to display the on-screen display that appears on the monitor screen when the controls on the remote control unit or main unit are operated. On Screen Display = ON o Auto Tuner Presets FM stations are received automatically and stored in the memory. A1 ~ A8 B1 ~B8 C1 ~C8 D1 ~D8 E1 ~E8 87.5/89.1/98.1/107.9/90.1/90.1/90.1/90.1 MHz 520/600/1000/1400/1500/1710 kHz, 90.1/90.1 MHz 90.1 MHz 90.1 MHz 90.1 MHz NOTES: • The on-screen display signals are not output from the color difference (component) video signal (MONITOR OUT) jacks. • The on-screen display signals are output with priority to the S-VIDEO MONITOR OUT jack during playback of a video component. For example, if the TV monitor is connected to both the AVR-3801's S-Video and video monitor output jacks and signals are input to the AVR-3801 from a video source (VDP, etc.) connected to both the S-Video and video input jacks, the on-screen display signals are output with priority to the S-Video monitor output. If you wish to output the signals to the video monitor output jack, do not connect a cord to the S-VIDEO MONITOR OUT jack. (For details, see page 28.) • The AVR-3801's on-screen display function is designed for use with high resolution monitor TVs, so it may be difficult to read small characters on TVs with small screens or low resolutions. • The setup menu is not displayed when "HEADPHONE ONLY" is selected. 16