Denon AVR-3801 Owners Manual - Page 23
to the default values. - reset
View all Denon AVR-3801 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
2 ENTER SHIFT Switch to the Delay Time screen. 3 Select the desired unit, meters or feet. TUNING Select (darken) the desired units, "Meters" or "Feet". BAND MODE TUNING 4 Once "Meters" or "Feet" is selected in step 3, the Delay Time screen appears automatically. Example: When "Feet" is selected 5 Select the speaker to be set. TUNING BAND MODE TUNING 6 Set the distance between the TUNING center speaker and listening BAND MODE position. The distance changes in units of 1 TUNING foot (0.1 meters) each time the button is pressed. Select the value closest to the measured distance. Example: When the distance is set to 12 feet for the center speaker If "Yes" is selected for "Default", the settings are automatically reset to the default values. Please note that the difference of distance for every speaker should be 15 ft (4.5 m) or less. If you set an invalid distance, a CAUTION notice, such as screen right will appear. In this case, please relocate the blinking speaker(s) so that its distance is no larger than the value shown in highlighted line. 22