Denon AVR-3801 Owners Manual - Page 45

After starting playback [1] Adjusting the sound quality (TONE) The tone control function will not work in the direct mode. 1 The tone switches as follows each time the TONE CONTROL button is pressed. TONE CONTROL BASS TREBLE (Main unit) 2 With the name of the volume to be adjusted selected, turn the SELECT knob to adjust the level. SELECT (Main unit) • To increase the bass or treble: Turn the control clockwise. (The bass or treble sound can be increased to up to +12 dB in steps of 2 dB.) • To decrease the bass or treble: Turn the control clockwise. (The bass or treble sound can be decreased to up to -12 dB in steps of 2 dB.) [2] Listening over headphones 1 Connect the headphones to the PHONES jack of the front panel. PHONES 1 2 Press the OUTPUT button to play the sound over the headphones only. OUTPUT TV/ VCR 0 +10 TEST TONE DOLBY/DTS SURROUND SPEAKER OUTPUT SURROUND DSP SIMU. 5CH / 7CH STEREO 2 • The output to the speaker and pre-out jacks is turned off and no sound is produced from the speakers. Caution: Switching off the power of the unit and the unit will cancel the settings. NOTE: To prevent hearing loss, do not raise the volume level excessively when using headphones. [3] Turning the sound off temporarily (MUTING) 1 Use this to turn off the audio output temporarily. MUTING Press the MUTING button. Cancelling MUTING mode. Press the MUTING button again. (Remote control unit) TUNING + + SKIP ENTER - SKIP SHIFT MUTING - TUNER PHONO CD 1 1 2 3 44