Denon AVR 3802 Owners Manual - Page 25

ENGLISH [4] Combining the currently playing sound with the desired image 1 Simulcast playback Use this switch to monitor a video source other B than the audio source. Press the VIDEO SELECT VIDEO SELECT button repeatedly until the desired source appears on the display. (Main unit) Cancelling simulcast playback. 1 • Select "SOURCE" using the VIDEO SELECT button. • Switch the program source to the component connected to the video input. [5] Checking the currently playing program source, etc. 1 On screen display • Each time an operation is OSD performed, a description of that operation appears on VCR DBS/CABLE VDP DVD the display connected to the (Remote control unit) unit's VIDEO MONITOR OUT jack. Also, the unit's operating status can be DISPLAY SURR. PARA. SETUP TUNING MENU OSD RETURN A/B BAND MODE MEMORY 1 checked during playback by pressing the remote control unit's OSD button. 1 Such information as the position of the input selector and the surround parameter settings is output in sequence. Using the dimmer function • Use this to change the brightness of the display. DIMMER Front panel display The display brightness changes in • Descriptions of the unit's operations are also displayed STATUS four steps (bright, medium, dim and off) by pressing the remote control (Main unit) on the front panel display. unit's DIMMER button repeatedly. In addition, the display can be switched to check the unit's operating status while (Main unit) The brightness changes in 3 steps each time the button is pressed, and finally the display turns off. playing a source by pressing the STATUS button. Multi-source recording/playback [1] Playing one source while recording another (REC OUT mode) 1 Press the REC/MULTI button. REC / MULTI 2,4 2 B (Main unit) 2 With "RECOUT SOURCE" displayed, turn the FUNCTION FUNCTION knob to select the source you wish to record. • The "REC" indicator and the indicator of the selected (Main unit) source light. 3 Set the recording mode. • For operating instructions, refer to the manual of the component on which you want to record. 4 To cancel, turn the function knob and select "SOURCE". FUNCTION • When "SOURCE" is selected, the "REC" indicator turns off. (Main unit) 1 Display 2 REC PHONO CD TUNER DVD VDP TV / DBS VCR -1 -2 TAPE RECOUT SOURCE NOTES: • Recording sources other than digital inputs selected in the REC OUT mode are also output to the multi source audio output jacks. • Digital signals are not output from the REC SOURCE or audio output jacks. [2] Outputting a program source to an amplifier, etc., in a different room (MULTI mode) 1 Press the REC/MULTI button. The display switches as follows REC / MULTI each time the button is pressed. 2,4 2 B (Main unit) 2 With "M-SOURCE SOURCE" displayed, turn the FUNCTION FUNCTION knob and select the source you wish to output. • The "MULTI" indicator and the indicator of the selected (Main unit) source light. 3 Start playing the source to be output. • For operating instructions, refer to the manuals of the respective components. 4 To cancel, turn the function knob and select "SOURCE". FUNCTION • When "SOURCE" is selected, the "MULTI" indicator turns off. (Main unit) 1 Display 2 PHONO CD TUNER DVD VDP TV / DBS MULTI VCR -1 -2 TAPE M-SOURCE SOURCE NOTES: • The signals of the source selected in the MULTI mode are also output from the VCR-1, VCR2/V.AUX and CDR/TAPE recording output terminals. • Digital signals are not output from the multi source audio output jacks. 25