Denon AVR 3802 Owners Manual - Page 28

ENGLISH 3 Set the surround parameter mode. SURROUND PARAMETER SURR. PARA. Display MODE CINEMA (Main unit) (Remote control unit) The on-screen display differs according to whether the operation is performed from the main unit or the remote control unit. 4 Select the play mode. SELECT TUNING BAND MODE TUNING (Main unit) Display (Remote control unit) MODE CINEMA MODE MUSIC MODE PRO LOGIC 5 Select the various parameters. (See "Surround parameters q" for a description of the various parameters.) SURROUND PARAMETER TUNING BAND MODE TUNING (Main unit) (Remote control unit) MODE CINEMA CINEMA EQ MODE MUSIC PANORAMA DIMENSION CENTER WIDTH MODE PRO LOGIC CINEMA EQ When set with the on-screen display using the remote control unit while in the MUSIC mode, set the " " mark to "OPTION 0" using the D and H cursor buttons, then press the F cursor button. Press the ENTER button to return to the previous screen. 6 Set the various surround parameters. SELECT TUNING BAND MODE TUNING (Main unit) (Remote control unit) 7 When the surround parameters are set using the buttons on the main unit, stop operating buttons after completing the settings. The settings are automatically finalized and the normal display reappears after several seconds. When the settings are made using the buttons on the remote control unit, press the SURR. PARA. button to finish. NOTE: • There are four Dolby Surround Pro Logic modes (NORMAL, PHANTOM, WIDE and 3 STEREO). The AVR-3802 sets the mode automatically according to the types of speakers set during the system setup process (page 10). Surround parameters q Pro Logic II Mode: The Cinema mode is for use with stereo television shows and all programs encoded in Dolby Surround. The Music mode is recommended as the standard mode for autosound music systems (no video), and is optional for A/V systems. The Pro Logic mode offers the same robust surround processing as original Pro Logic in case the source contents is not of optimum quality. Select one of the modes ("Cinema", "Music" or "Pro Logic"). Panorama Control: This mode extends the front stereo image to include the surround speakers for an exciting "wraparound" effect with side wall imaging. Select "OFF" or "ON". Dimension Control: This control gradually adjust the soundfield either towards the front or towards the rear. The control can be set in 7 steps from o to 6. Center Width Control: This control adjust the center image so it may be heard only from the center speaker; only from the left/right speakers as a phontom image; or from all three front speakers to varying degrees. The control can be set in 8 steps from 0 to 7. Dolby Digital mode (only with digital input) and DTS Surround mode (only with digital input) 1 Select the input source. Playback with digital input q Select an input source set to digital (COAXIAL/OPTICAL) (see page 14). FUNCTION VDP 5 (Main unit) (Remote control unit) w Set the input mode to "AUTO" or "DTS". AUTO DTS MODE 1 3 B 31 2 4,5 2,6 POWER OFF ON / SOURCE RC-884 REMOTE CONTROL UNIT (Main unit) (Remote control unit) 2 DOLBY/DTS SURROUND Select the Dolby/DTS Surround mode. (Remote control unit) When performing this operation from the main unit's panel, press the SURROUND MODE button, then turn the SELECT knob and select Dolby Pro logic or DTS NEO:6. SURROUND MODE SELECT (Main unit) (Remote control unit) 4 5, 6 1 2 3 1 TV CD CDR/MD/ TAPE RECEIVER VCR DBS/CABLE VDP DVD DISPLAY SURR. PARA. SETUP TUNING MENU OSD RETURN A/B MEMORY BAND MODE CHANNEL VOLUME TUNING + + SKIP ENTER - SKIP SHIFT MUTING TUNER 1 PHONO 2 CDR/ TAPE VDP 4 5 VCR-1 7 VCR-2 /V.AUX 8 - CD 3 DVD 6 TV/DBS 9 TV/ VCR RDS TEST TONE DOLBY/DTS SURROUND 0 PTY SPEAKER +10 RT OUTPUT SURROUND DSP SIMU. 5CH / 7CH STEREO 6.1 / 7.1 SURROUND DIRECT MODE INPUT ANALOG SYSTEM CALL CALL 1 CALL 2 STEREO EXT.IN BACKLIGHT 28