Denon AVR 3802 Owners Manual - Page 27

ENGLISH 10 SURROUND Before playing with the surround function • Before playing with the surround function, be sure to use the test tones to adjust the playback level from the different speakers. This adjustment can be performed with the system setup (see page 13) or from the remote control unit, as described below. • Adjusting with the remote control unit using the test tones is only possible in the "Auto" mode and only effective in the DOLBY/DTS SURROUND modes. The adjusted levels for the different modes are automatically stored in the memory. 1 TEST TONE Press the TEST TONE button. (Remote control unit) 2 Test tones are output from TUNING the different speakers. Use BAND MODE the channel volume adjust TUNING buttons to adjust so that the volume of the test tones is the same for all the speakers. (Remote control unit) 2 1, 3 SETUP TUNING RETURN A/B MEMORY BAND MODE CHANNEL VOLUME TUNING + + SKIP ENTER - SKIP SHIFT MUTING TUNER 1 PHONO 2 CDR/ TAPE VDP 4 5 VCR-1 VCR-2 /V.AUX 7 8 - CD 3 DVD 6 TV/DBS 9 TV/ VCR RDS TEST TONE 0 PTY SPEAKER +10 RT OUTPUT 3 TEST TONE After completing the adjustment, press the TEST TONE button again. (Remote control unit) • After adjusting using the test tones, adjust the channel levels either according to the playback sources or to suit your tastes, as described below. 1 Select the speaker whose level you want to adjust. B CH VOL ENTER SHIFT (Main unit) (Remote control unit) The channel switches as shown below each time the button is pressed. FL C FR SR SBR SBL FADER SW SL 2 Adjust the level of the selected speaker. SELECT TUNING BAND MODE TUNING (Main unit) (Remote control unit) When the surround back speaker setting is set to "1spkr" for "Speaker Configuration", this is set to "SB". 21 2 SETUP TUNING RETURN A/B BAND MODE MEMORY CHANNEL VOLUME TUNING + + SKIP ENTER 1 - SKIP SHIFT MUTING - TUNER PHONO CD NOTES: • The adjustment range for the different channels is +12 dB to -12 dB. • When using the DIRECT mode, the sound from the subwoofer can be cut by lowering the SW (subwoofer) setting one step from -12 dB (setting it to "OFF"). Fader function • This function makes it possible to lower the volume of the front channels (FL, C and FR) or the rear channels (SL, SR, SBL and SBR) together. Use it for example to adjust the balance of the sound from the different positions when playing multi-channel music sources. 1 Select "FADER". B CH VOL ENTER SHIFT (Main unit) (Remote control unit) The channel switches in the order shown below each time this button is pressed. FL C FR SR SBR SBL FADER SW SL 2 Press the D button to reduce the volume of the front channels, the H button to reduce the volume of the rear channels. The fader function does not affect the SW channel. SELECT TUNING BAND MODE TUNING 21 2 SETUP TUNING RETURN A/B BAND MODE MEMORY CHANNEL VOLUME TUNING + + SKIP ENTER 1 - SKIP SHIFT MUTING - TUNER PHONO CD (Main unit) (Remote control unit) The channel whose channel level is adjusted lowest can be faded to -12 dB using the fader function. If the channel levels are adjusted separately after adjusting the fader, the fader adjustment values are cleared, so adjust the fader again. This is only displayed when setting the fader control. Dolby Surround Pro Logic II mode B 1 3, 5 1, 4, 6 1 Select the Dolby Surround Pro Logic II mode. • The Dolby Pro Logic indicator lights. SURROUND MODE SELECT DOLBY/DTS SURROUND Light Display (Main unit) (Remote control unit) 2 Play a program source with the mark. • For operating instructions, refer to the manuals of the respective components. 3 4, 5, 6 1 TV CD CDR/MD/ TAPE RECEIVER VCR DBS/CABLE VDP DVD DISPLAY SURR. PARA. SETUP TUNING MENU OSD RETURN A/B MEMORY BAND MODE CHANNEL VOLUME TUNING + + SKIP ENTER - SKIP SHIFT MUTING TUNER 1 PHONO 2 CDR/ TAPE VDP 4 5 VCR-1 VCR-2 /V.AUX 7 8 - CD 3 DVD 6 TV/DBS 9 TV/ VCR RDS TEST TONE DOLBY/DTS SURROUND 0 PTY SPEAKER +10 RT OUTPUT SURROUND DSP SIMU. 5CH / 7CH STEREO 6.1 / 7.1 SURROUND DIRECT MODE INPUT ANALOG SYSTEM CALL STEREO EXT.IN 27