Denon AVR-3803 Owners Manual - Page 23

Test Tone Start, Speaker Configuration - 7 1 manual

Get Denon AVR-3803 PDF manuals and user guides View all Denon AVR-3803 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 23 highlights

4 Select the mode. Select "Auto" or "Manual". • Auto: Adjust the level while listening to the test tones produced automatically from the different speakers. • Manual: Select the speaker from which you want to produce the test tone to adjust the level. Example: When the "Auto" mode is selected 5 Select "Surr. Sp.", then select the surround speaker(s) from which you want to produce the test tone (A, B or A+B). • Surr. Sp.: A Adjusts the balance of the playback level between the channels when using surround speaker A. • Surr. Sp.: B Adjusts the balance of the playback level between the channels when using surround speaker B. • Surr. Sp.: A+B Adjusts the balance of the playback level between the channels when using surround speakers A and B at the same time. The "Surr. Sp." can only be selected when both surround speakers A and B have been selected at the System Setup Menu (when both A and B have been set to "Large" or "Small"). 6 Select "Test Tone Start". 7 Select "Yes". 8 a. If the "Auto" mode is selected: Test tones are automatically emitted from the different speakers. The test tones are emitted from the different speakers in the following order, at 4-second intervals the first time and second time around, 2-second intervals the third time around and on: 1spkr SB Flashing FL C FR SR SBR SBL SL SW 2spkrs When the surround back speaker setting is set to "1spkr" for "Speaker Configuration", this is set to "SB". Use the CURSOR left and right buttons to adjust all the speakers to the same volume. The volume can be adjusted between -12 dB and +12 dB in units of 1 dB. Example: When the volume is set to -11.5 dB while the test tone is being produced from the Front Lch speaker b. When the "Manual" mode is selected Use the CURSOR up and down to select the speaker for which you want to output test tones, then use the CURSOR left and right to adjust so that the volume of the test tones from the various speakers is the same. Flashing Example: When the volume is set to -11.5 dB while the Front Lch speaker is selected 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
23
4
5
Select the mode.
Select
“
Auto
”
or
“
Manual
”
.
•
Auto:
Adjust the level while listening to the test tones produced
automatically from the different speakers.
•
Manual:
Select the speaker from which you want to produce the test tone to
adjust the level.
Select
“
Surr. Sp.
”
, then select the surround speaker(s) from which you want to produce the test
tone (A, B or A+B).
•
Surr. Sp.: A
Adjusts the balance of the playback level between the channels when using surround speaker A.
•
Surr. Sp.: B
Adjusts the balance of the playback level between the channels when using surround speaker B.
•
Surr. Sp.: A+B
Adjusts the balance of the playback level between the channels when using surround speakers
A and B at the same time.
The
“
Surr. Sp.
”
can only be selected when both surround speakers A and B have been selected
at the System Setup Menu (when both A and B have been set to
“
Large
”
or
“
Small
”
).
Example: When the
“
Auto
”
mode is selected
6
7
8
Select
“
Test Tone Start
”
.
Select
“
Yes
”
.
a.
If the
“
Auto
”
mode is selected:
Test tones are automatically emitted from the different speakers.
The test tones are emitted from the different speakers in the
following order, at 4-second intervals the first time and second time
around, 2-second intervals the third time around and on:
Use the CURSOR left and right buttons to adjust all the speakers to the
same volume.
The volume can be adjusted between
–
12 dB and +12 dB in units of
1 dB.
b.
When the
“
Manual
”
mode is selected
Use the CURSOR up and down to select
the speaker for which you want to output
test tones, then use the CURSOR left and
right to adjust so that the volume of the
test tones from the various speakers is
the same.
Example:
When the volume is set to
–
11.5 dB
while the test tone is being
produced from the Front Lch
speaker
Example: When the volume is set to
–
11.5 dB
while the Front Lch speaker is
selected
Flashing
Flashing
FL
C
FR
SR
SBR
SBL
SL
SW
SB
1spkr
2spkrs
When the surround back speaker setting is set to
“
1spkr
”
for
“
Speaker Configuration
”
, this is set to
“
SB
”
.