Denon AVR-3803 Owners Manual - Page 83
SPECIFICATIONS, Total Harmonic Distortion at 1 kHz
View all Denon AVR-3803 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
17 SPECIFICATIONS 2 Audio section • Power amplifier Rated output: Front: 110 W + 110 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.) 150 W + 150 W (6 Ω/ohms, 1 kHz with 0.7% T.H.D.) Center: 110 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.) 150 W (6 Ω/ohms, 1 kHz with 0.7% T.H.D.) Surround: 110 W + 110 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.) 150 W + 150 W (6 Ω/ohms, 1 kHz with 0.7% T.H.D.) Surround Back: 110 W + 110 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.) 150 W + 150 W (6 Ω/ohms, 1 kHz with 0.7% T.H.D.) Dynamic power: 140 W x 2 ch (8 Ω/ohms) 210 W x 2 ch (4 Ω/ohms) 240 W x 2 ch (2 Ω/ohms) Output terminals: Front, Center, Surr. Back/Zone 2: 6 ~ 16 Ω/ohms Surround: A or B 6 ~ 16 Ω/ohms A+B 8 ~ 16 Ω/ohms • Analog Input sensitivity / input impedance: 200 mV / 47 kΩ/kohms Frequency response: 10 Hz ~ 100 kHz: +0, -3 dB (DIRECT mode) S/N: 102 dB (DIRECT mode) Distortion: 0.005% (20 Hz ~ 20 kHz) (DIRECT mode) Rated output: 1.2 V • Digital D/A output: Rated output - 2 V (at 0 dB playback) Total harmonic distortion - 0.008% (1 kHz, at 0 dB) S/N ratio - 102 dB Dynamic range - 96 dB Digital input: Format - Digital audio interface • Phono equalizer (PHONO input - REC OUT) Input sensitivity: 2.5 mV RIAA deviation: ±1 dB (20 Hz to 20 kHz) Signal-to-noise ratio: 74 dB (A weighting, with 5 mV input) Rated output / Maximum output: 150 mV / 8 V Distortion factor: 0.03% (1 kHz, 3 V) 2 Video section • Standard video jacks Input / output level and impedance: 1 Vp-p, 75 Ω/ohms Frequency response: 5 Hz ~ 10 MHz - +0, -3 dB • S-video jacks Input / output level and impedance: Y (brightness) signal - 1 Vp-p, 75 Ω/ohms C (color) signal - 0.286 Vp-p, 75 Ω/ohms Frequency response: 5 Hz ~ 10 MHz - +0, -3 dB • Color component video jacks Input / output level and impedance: Y (brightness) signal - 1 Vp-p, 75 Ω/ohms PB/CB (blue) signal - 0.7 Vp-p, 75 Ω/ohms PR/CR (red) signal - 0.7Vp-p, 75 Ω/ohms Frequency response: DC ~ 100 MHz - +0, -3 dB 2 Tuner section [FM] (note: µV at 75 Ω/ohms, 0 dBf=1 x 10-15 W) [AM] Receiving Range: 87.50 MHz ~ 107.90 MHz 520 kHz ~ 1710 kHz Usable Sensitivity: 1.0 µV (11.2 dBf) 18 µV 50 dB Quieting Sensitivity: MONO 1.6 µV (15.3 dBf) STEREO 23 µV (38.5 dBf) S/N (IHF-A): MONO 77 dB STEREO 72 dB Total Harmonic Distortion (at 1 kHz): MONO 0.15% STEREO 0.3% 2 General Power supply: AC 120 V, 60 Hz Power consumption: 7.0 A 1 W Max (Standby) Maximum external dimensions: 434 (W) x 171 (H) x 416 (D) mm (17-3/32" x 6-47/64" x 16-3/8") Mass: 16.5 kg (36 lbs 6 oz) 2 Remote control unit (RC-921) Batteries: R6P/AA Type (three batteries) External dimensions: 58 (W) x 230 (H) x 37 (D) mm (2-9/32" x 9-1/16" x 1-29/64") Mass: 230 g (Approx. 8 oz) (including batteries) * For purposes of improvement, specifications and design are subject to change without notice. 83