Denon AVR-990 Owners Manual - English - Page 38

Getting Started Connections Settings Playback ZONE2 Remote Control Information Troubleshooting Specifications ENGLISH Making Detailed Settings (Manual Setup) Setting items Setting contents Front Speaker Setup Setting : Choose the method for setting the front speakers. Set the front speakers to use • Normal : The front speakers are set using the . for every surround mode. • Custom : The front speakers used for the different playing modes are set in advance. 2CH DIRECT/STEREO : The front speakers used in the direct, stereo and pure direct play modes (2 channel) are set in advance. • A : Front speaker A is used. • B : Front speaker B is used. • A+B : Both front speakers A and B are used. MULTI CH : The front speakers used in modes other than the direct, stereo and pure direct play modes (2 channel) are set in advance. • A : Front speaker A is used. • B : Front speaker B is used. • A+B : Both front speakers A and B are used. NOTE • When set to "Custom", does not operate. • The front speaker setting stored for the "Quick Select" function is given priority. Making the HDMI Settings (HDMI Setup) Default settings are underlined. Make settings for HDMI video/audio output. Setting items Setting contents RGB Range Normal : Output with RGB video range (16 (black) to 235 (white)). Set the video range of RGB Enhanced : Output with RGB video range (0 (black) to 255 (white)). output from the HDMI terminal. This setting is valid when using a TV equipped with a DVI terminal. Auto Lip Sync ON : Compensated. Automatic compensation OFF : Not compensated. for timing shift in audio and video output. Audio Out AMP : Playback through speakers connected to the receiver. Select HDMI audio output TV : Playback through TV connected to the receiver. device. When the HDMI control function is operating, the setting of audio playback in the connected TV takes priority (vpage 76 "HDMI Control Function"). Setting items Setting contents HDMI Control ON : Use the HDMI control function. External devices can be OFF : Do not use the HDMI control function. controlled from the AVR- 990 and the AVR-990 can be controlled from external devices. • Please consult the operating instructions for each connected device to check the settings. • For details on the HDMI control function, see "HDMI Control Function" NOTE (vpage 76). The HDMI control function controls operations of a TV that is compatible with the HDMI control function. Make sure that the TV and HDMI are connected when you perform HDMI control. NOTE • When "HDMI Control" is set to "ON", it consumes more standby power. • W hen not using this unit for a long period, we recommend that you press to turn off (jOFF) the power. • W hen the "HDMI Control" setting has been changed, always turn off the power to the connecting devices afterwards and then turn back on. • T he "HDMI Control" does not work when the power to the equipment is off. • When "HDMI Control" is set to "ON", power is supplied constantly to the AC outlet (UNSWITCHED). Standby Source Last : Standby with last used input source during power on. Set the HDMI connector for HDMI1 / HDMI2 / HDMI3 / HDMI4 / HDMI5 : The standby mode is set at HDMI signal input during the input source assigned to the respective. standby. This can be set when "HDMI Control" is set to "ON". Power Off Control ON : Switched. The power of the AVR-990 OFF : Not switched. and external device turn off together. • This can be set when "HDMI Control" is set to "ON". • Please consult the operating instructions for each connected device to check the settings. • For details on the HDMI control function, see "HDMI Control Function" (vpage 76). 35 Remote control operation buttons :Displaying the menu Cancel the menu :Moves the cursor (Up/Down/Left/Right) :Confirm the setting :Return to previous menu