Denon AVR-990 Owners Manual - English - Page 46

Getting Started Connections Settings Playback ZONE2 Remote Control Information Troubleshooting Specifications ENGLISH Making Detailed Settings (Manual Setup) Setting items Setting contents Firmware Update Check for Update : You can check for firmware updates. You can also Update the firmware of the check approximately how long it will take to complete an update. receiver. Start : Execute the update process. When updating starts, the power indicator becomes red and the GUI screen is shut down. The amount of update time which has elapsed is displayed. When updating is complete the power indicator becomes green and normal status is resumed. b If updating fails, the set automatically retries, but if updating is still not possible, one of the messages shown below is displayed. If the display reads as shown below, check the settings and network environment, then update again. Display Description Updating failed Login failed Server is busy Updating failed. Failure to log into server. Server is busy. Wait a while then try again. Connection fail Failure connecting to server. Download fail Downloading of the firmware has failed. Add New Feature Upgrade : Execute the upgrade process. Display the new functions When updating starts, the power indicator becomes red and the GUI (payment required) which screen is shut down. The amount of update time which has elapsed is can be purchased for displayed. downloading to the AVR-990 When updating is complete the power indicator becomes green and and upgrade. normal status is resumed. When you purchase a b If the upgrade is not successful, an error message identical to those in new function and register "Firmware Update" will appear on the display, check the settings and your user information, network environment, then update again. "Registered" is displayed on this menu and you can proceed with the upgrade. Upgrade Status : A list of the additional functions provided by the Upgrade will be displayed. When "Not Registered" is displayed on the Add New Feature screen, you cannot upgrade. To use the upgrade function, you should purchase an upgrade package from the DENON website. To purchase the package, you will need the ID number shown on this screen. To display the ID number on the screen, hold and down for 3 seconds or more. Notes concerning use of "Firmware Update" and "Add New Feature" • In order to use these functions, you must have the correct system requirements and settings for a broadband Internet connection. • Do not turn off the power until updating or upgrating is completed. • Even with a broadband connection to the Internet, approximately 1 hour is required for the updating/ upgrading procedure to be completed. Once updating/upgrading starts, normal operations on the AVR-990 cannot be performed until updating/ upgrading is completed. Furthermore, updating/upgrading the firmware may reset the backup data for the parameters, etc., set for the AVR-990. • The following backup data may be erased after an update or upgrade. • Internet radio preset channel • Internet radio Recently Played data • Care of data in Internet radio, media server and USB memory device • In the event of an update error during update or upgrade, turn the AVR-990's power off and then on again. "Update Retry" appears on the display and update restarts from the point at which update failed. If the error continues despite this, check the network environment. • Information regarding the "Firmware Update" function and "Add New Feature" will be announced on the DENON web site each time related plans are defined. • When usable new firmware is released with "Firmware Update" or "Add New Feature", a notification message is displayed on the GUI screen. When you do not want to be notified, set "Update Notification" (vpage 39) and "Upgrade Notification" (vpage 39) to "OFF". 43 Remote control operation buttons :Displaying the menu Cancel the menu :Moves the cursor (Up/Down/Left/Right) :Confirm the setting :Return to previous menu