Denon AVR-990 Owners Manual - English - Page 75

Getting Started Connections Settings Playback ZONE2 Remote Control Information Troubleshooting Specifications Setting items Audyssey Settings (Continued) Setting contents Dynamic Volume : Solves the problem of large variations in volume level between TV, movies and other content (between quiet passages and loud passages, etc.) by automatically adjusting to the user's preferred volume setting. • ON : Use the "Dynamic Volume" equalizer. The Dynamic Volume effect will be at the level of the "Setting" (vpage 72). • OFF : Do not use the "Dynamic Volume" equalizer. • " " is displayed when set to "ON". • When "MultEQ" is set to "OFF", "Dynamic Volume" is automatically set to "OFF". • You can also press DYNAMIC VOLUME to set. Operation on the main unit Dynamic EQ / Volume : ON Dynamic EQ : ON / Volume : OFF ""GGrreeeenn"" ""RReedd"" Dynamic EQ / Volume : OFF Operation on the remote control unit Dynamic EQ / Volume : ON Dynamic EQ : ON / Volume : OFF ENGLISH Adjusting the Sound and Picture Quality (Audio/Video Adjust) Setting items Setting contents Manual EQ Adjust CH : Correct the tone of each speaker. Use the graphic equalizer q Select the speaker tone adjustment method. to adjust the tone of each All : Adjust the tone of all speakers together. speaker. L/R : Adjust the tone of left and right speakers together. Each : Adjust the tone of each speaker. w Select the speaker. e Select the adjustment frequency band. 6 3Hz / 125Hz / 250Hz / 500Hz / 1kHz / 2kHz / 4kHz / 8kHz / 16kHz b Select the speakers you want to adjust when "L/R" or "Each" is selected. r Adjust the level. -20.0dB ~ +6.0dB (0.0dB) Can be set when the "MultEQ" setting (vpage 71) is "Manual". Base Curve Copy : Copy "Audyssey Flat" curve from MultEQ. Yes : Copy. No : Do not copy. "Base Curve Copy" is displayed after Audyssey Auto Setup procedure has been performed. Default : Reset the settings to the default values. • Yes : Reset. • No : Do not Reset. If you select "Default" and press ENTER the message "Default Setting?" is displayed. Select "Yes" or "No", and then press ENTER. "Green" "Red" About Dynamic Volume Audyssey Dynamic Volume™ solves the problem of large variations in volume level between television programs, commercials, and between the soft and loud passages of movies. Audyssey Dynamic EQ™ is integrated into Dynamic Volume so that as the playback volume is adjusted automatically, the perceived bass response, tonal balance, surround impression, and dialog clarity remain the same. Setting : Set "Dynamic Volume" equalizer effect. • Midnight : High setting affects volume the most, causing all sounds to be of equal loudness. • Evening : Middle setting prevents loud and soft sounds from being much louder and softer respectively than average sounds. • Day : Low setting provides the least adjustments to the loudest and softest of sounds. Can be set when "Dynamic Volume" is set to "ON". Remote control operation buttons :Displaying the menu Cancel the menu :Moves the cursor (Up/Down/Left/Right) :Confirm the setting See overleaf :Return to previous menu 72