Denon AVR-990 Owners Manual - English - Page 40
Making the Network Settings Network Setup
UPC - 883795001052
View all Denon AVR-990 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Getting Started Connections Settings Playback ZONE2 Remote Control Information Troubleshooting Specifications ENGLISH Making Detailed Settings (Manual Setup) Setting items EQ Customize (Continued) Setting contents Audyssey Flat : Set when not using the "Audyssey Flat" equalizer. • Used : Use. • Not Used : Do not use. Set so that "Audyssey Flat" settings can be made when Audyssey™ Auto Setup procedure is performed. Manual : Set when not using the "Manual" equalizer. • Used : Use. • Not Used : Do not use. Making the Network Settings (Network Setup) Default settings are underlined. Make network settings. Setting items Setting contents Network Connecting 1. C onnect the LAN cable (vpage 22 "Connecting to a Home Network Make settings for wired (LAN)"). LAN. 2. T urn on the AVR-990 (vpage 23 "Turning the Power On"). AVR-990 performs automatic network setup due to the DHCP function. When connecting to a network that has no DHCP function, perform the setting in step 3. 3. S et the IP address at the "Network Connecting". w e q r Setting items Network Connecting (Continued) Setting contents q On the GUI menu, select "Network Connecting" - "Detail" and press ENTER. w Use o p to set "DHCP" to "OFF", then press i. The DHCP function is disabled. e Use uip to input the address and press ENTER. • IP Address : Set the IP address within the ranges shown below. The Network Audio function cannot be used if other IP addresses are set. CLASS A: 10.0.0.0 ~ 10.255.255.255 CLASS B: 172.16.0.0 ~ 172.31.255.255 CLASS C: 192.168.0.0 ~ 192.168.255.255 • Subnet Mask : When connecting an xDSL modem or terminal adapter directly to the AVR-990, input the subnet mask indicated in the documentation supplied by your provider. Normally input 255.255.255.0. • Default Gateway : When connected to a gateway (router), input its IP address. • Primary DNS, Secondary DNS : If there is only one DNS address indicated in the documentation supplied by your provider, input it at "Primary DNS". If there are two or more DNS addresses, input the first one at "Secondary DNS". r Use i to select "Exit" and press ENTER. Setup is complete. b When connecting to the network via a Proxy server, select "Proxy" and press ENTER (vpage 38 "Proxy settings"). • If you are using a broadband router (DHCP function), there is no need to make the settings at "IP Address" and "Proxy", since the DHCP function is set to "ON" in the AVR-990's default settings. • If the AVR-990 is being used connected to a network without the DHCP function, the network settings must be made. In this case, some knowledge of networks is required. For details, consult a network administrator. • If you cannot connect to the Internet, recheck the connections and settings (vpage 22). • If you do not understand about Internet connection, contact your ISP (Internet Service Provider) or the store from which you purchased your computer. • When you want to cancel the setting during IP address input, press RETURN. 37 Remote control operation buttons :Displaying the menu Cancel the menu :Moves the cursor (Up/Down/Left/Right) :Confirm the setting :Return to previous menu