Denon AVR-991 Owners Manual - English - Page 113
Specifications
UPC - 883795001397
View all Denon AVR-991 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
ENGLISH Specifications nn Audio section • Power amplifier Rated output: Front: 125 W + 125 W (8 Ω, 20 Hz - 20 kHz with 0.05 % T.H.D.) 165 W + 165 W (6 Ω, 1 kHz with 0.7 % T.H.D.) Center: 125 W (8 Ω, 20 Hz - 20 kHz with 0.05 % T.H.D.) 165 W (6 Ω, 1 kHz with 0.7 % T.H.D.) Surround: 125 W + 125 W (8 Ω, 20 Hz - 20 kHz with 0.05 % T.H.D.) 165 W + 165 W (6 Ω, 1 kHz with 0.7 % T.H.D.) Surround back / Front height / Front wide: 125 W + 125 W (8 Ω, 20 Hz - 20 kHz with 0.05 % T.H.D.) 165 W + 165 W (6 Ω, 1 kHz with 0.7 % T.H.D.) Dynamic power: 130 W x 2ch (8 Ω) 190 W x 2ch (4 Ω) Output connectors: 6 - 16 Ω • Analog Input sensitivity/Input impedance: 200 mV/47 kΩ Frequency response: 10 Hz - 100 kHz - +1, -3 dB (DIRECT mode) S/N: 102 dB (IHF-A weighted, DIRECT mode) Distortion: 0.005 % (20 Hz ~ 20 kHz) (DIRECT mode) Rated output: 1.2 V • Digital D/A output: Rated output - 2 V (at 0 dB playback) Total harmonic distortion - 0.008 % (1 kHz, at 0 dB) S/N ratio - 102 dB Dynamic range - 100 dB Digital input: Format - Digital audio interface • Phono equalizer (PHONO input - REC OUT) Input sensitivity: 2.5 mV RIAA deviation: ±1 dB (20 Hz to 20 kHz) S/N: 74 dB (A weighting, with 5 mV input) Rated output: 150 mV Distortion factor: 0.03 % (1 kHz, 3 V) nn Video section • Standard video connectors Input/output level and impedance: Frequency response: • Color component video connector Input/output level and impedance: Frequency response: 1 Vp-p, 75 Ω 5 Hz - 10 MHz - +1, -3 dB Y (brightness) signal - 1 Vp-p, 75 Ω PB / CB signal - 0.7 Vp-p, 75 Ω PR / CR signal - 0.7 Vp-p, 75 Ω 5 Hz - 60 MHz - +0, -3 dB (when "Video Convert" set to "OFF") nn Tuner section Receiving Range: Usable Sensitivity: 50 dB Quieting Sensitivity: S/N (IHF-A): Total harmonic Distortion (at 1 kHz): nn General Power supply: Power consumption: Maximum external dimensions: Weight: nn Remote control unit (RC-1146) Batteries: Maximum external dimensions: Weight: [FM] (Note: μV at 75 Ω, 0 dBf = 1 x 10-15 W) 87.5 MHz - 107.9 MHz 1.2 μV (12.8 dBf) MONO 2.8 μV (20.2 dBf) STEREO 48.7 μV (45 dBf) MONO 70 dB STEREO 67 dB MONO 0.7 % STEREO 1.0 % [AM] 520 kHz - 1710 kHz 18 μV AC 120 V, 60 Hz 670 W 0.1 W (Standby) 2.2 W (CEC standby) 434 (W) x 171 (H) x 381 (D) mm (17-3/32" x 6-47/64" x 15") 11.5 kg (25 lbs 5.7 oz) R6/AA Type (two batteries) 53 (W) x 224 (H) x 28 (D) mm (2-3/32" x 8-13/16" x 1-7/64") 160 g (5.6 oz, including batteries) For purposes of improvement, specifications and design are subject to change without notice. 110