Denon AVR-991 Owners Manual - English - Page 88

Simple version Basic version Setting items GUI (Continued) Setting details Wall Paper : Set wallpaper to display in the background when playback is stopped, etc. • Picture : Set the background to a picture (DENON logo). • Black : Set the background to black. Format : Set the video signal format to be output for the TV you are using. • NTSC : Select NTSC output. • PAL : Select PAL output. "Format" can also be set by the following procedure. However, the menu screen is not displayed. 1. Press and hold the main unit's p and i for at least 3 seconds. "Video Format" appears on the display. 2. Press o p and set the video signal format. 3. Press the main unit's ENTER, MENU or RETURN to complete the setting. NOTE When a format other than the video format of the connected TV is set, the picture will not be displayed properly. Text : Display the details of operation when switching surround mode, input mode, etc. • ON : Turn display on. • OFF : Turn display off. Master Volume : Display the master volume during adjustment. • Bottom : Display at the bottom. • Top : Display at the top. • OFF : Turn display off. When the master volume display is hard to see when superimposed on movie subtitles, set to "Top". NET/USB : Set the NET/USB screen display time when the input source is "NET/USB". • Always : Show display continuously. • 30sec : Show display for 30 seconds after operation. • 10sec : Show display for 10 seconds after operation. • OFF : Turn display off. ENGLISH Manual Setup Setting items Setting details GUI (Continued) TUNER : Set the tuner screen display time when the input source is "SIRIUS" or "TUNER". • Always : Show display continuously. • 30sec : Show display for 30 seconds after operation. • 10sec : Show display for 10 seconds after operation. • OFF : Turn display off. Remote Preset Codes Search a preset code to register in the remote control unit. iPod : Set the iPod screen display time when the input source is "DOCK" or "iPod (USB)". • Always : Show display continuously. • 30sec : Show display for 30 seconds after operation. • 10sec : Show display for 10 seconds after operation. • OFF : Turn display off. See "Registering preset codes" (vpage 89). Quick Select Name Change the "Quick Select" display title to one you prefer. • Up to 16 characters can be input. • For character input, see page 63. Zone Rename • Up to 10 characters can be input. Change the display title of • For character input, see page 63. each zone to one you prefer. Remote ID Setup 1 / 2 / 3 / 4 Used when receiving maintenance from a DENON NOTE service engineer or custom Only use this function if so instructed by a DENON serviceperson or installer. installer. Dimmer Adjust the display brightness of this unit. Bright : Normal display brightness. Dim : Reduced display brightness. Dark : Very low display brightness. OFF : Turns the display off. Buttons on the main unit can be used for operations. Each time DIMMER is pressed, the setting is changed as shown below. Bright Dim OFF Dark Advanced version Information Remote control operation buttons Move the cursor (Up/Down/Left/Right) Confirm the setting Return to previous menu 85