Denon AVR-991 Owners Manual - English - Page 56
Sleep timer function, Adjusting the volume of the speakers
UPC - 883795001397
View all Denon AVR-991 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Simple version Basic version ENGLISH Sleep timer function The power automatically goes into standby once the set time has elapsed. This is convenient for playing sources while going to sleep. Press SLEEP and display the time you want to set. The indicator on the display lights. • The time switches as shown below each time SLEEP is pressed. OFF 10 min 20 30 40 50 120 110 100 90 80 70 60 To cancel the sleep timer Press SLEEP to set "OFF". The indicator on the display turns off. • The sleep timer setting is canceled if this unit's power is set to standby or turned off. • When power to the main zone is turned off with the sleep timer, power in ZONE2 are also turned off. • If SLEEP on the main unit is pressed, the same function as with the remote control unit can be obtained. Adjusting the volume of the speakers You can adjust the channel level either according to the playback sources or to suit your taste, as described below. nnAdjusting the volume of the different speakers 1 Press ZONE SELECT to switch the zone mode to "MAIN". The "MAIN" indicator lights. 2 Press AMP to set the remote control unit to amplifier operation mode. 3 Press CH LEVEL. CHANNEL LEVEL Front L Front R Center Subwoofer Surround L Surround R S.Back L S.Back R Fader Select 0.0dB 0.0dB 0.0dB 0.0dB 0.0dB 0.0dB 0.0dB 0.0dB Front Rear 4 Use ui to select the speaker. The speaker that can be set switches each time one of the buttons is pressed. 5 Use o p to adjust the volume. Convenient functions nnAdjusting the volume of groups of speakers (Fader function) This function lets you adjust (fade) the sound all at once from the front (front speaker / front height speaker / front wide speaker / center speaker) or rear (surround speaker / surround back speaker). 1 Press ZONE SELECT to switch the zone mode to "MAIN". The "MAIN" indicator lights. 2 Press AMP to set the remote control unit to amplifier operation mode. 3 Press CH LEVEL. CHANNEL LEVEL Front L Front R Center Subwoofer Surround L Surround R S.Back L S.Back R Fader Select 0.0dB 0.0dB 0.0dB 0.0dB 0.0dB 0.0dB 0.0dB 0.0dB Front Rear 4 Press i to select "Fader", then select the item to be adjusting using o p. 5 Use o p to adjust the volume of the speakers. (o : front, p: rear) • In the case of a subwoofer, pressing o when it is at "-12 dB" will change the setting to "OFF". When a headphone jack is inserted, the headphone channel level can be adjusted. • The fader function does not affect the subwoofer. • The fader can be adjusted until the volume of the speaker is adjusted to the lowest value of -12 dB. Advanced version Information 53