Denon AVR4810CI Owners Manual - English - Page 108

Getting Started Connections Settings Playback Multi-zone Remote Control Information Troubleshooting Specifications Playing in ZONE2/ZONE3/ZONE4 (Multi-zone Function) This function allows you to play sound in rooms other than the main zone where multi-channel sound is played. The source selected for ZONE2 is also output from the recording output connectors. Audio Output There are two methods to do this, as described below. Choose one of the methods. q Zone playback by speaker output w Zone playback by audio output (PRE OUT / OPT OUT) Use an external amplifier. q Zone Playback by Speaker Output The ZONE2 and ZONE3 audio signals are output from the AVR4810CI's SURR BACK/AMP ASSIGN speaker terminals using the amplifier assignment function. Connecting and Setting the Speakers "Amp Assign" mode setting (vpage 34) and the audio signals that are output ZONE2 ZONE2 Output signal : Stereo (L / R) Connecting the speakers ZONE2 w qw q ZONE3 ZONE3 Output signal : Stereo (L / R) b M ono signals are outputted when "Amp ZONE2 Assign" - "Assign and Mode" is set to "FREE" ZONE3 and the signal assigned to the power amp is set to "Z2/Z3 (M)". ZONE3 w qw q ZONE2 ZONE3 wq wq w Zone Playback by Audio Output (PRE OUT / OPT OUT) Audio Connections (ZONE2, ZONE3) The audio signals of the AVR-4810CI's ZONE2 and ZONE3 audio output terminals are output to the ZONE2 and ZONE3 amplifiers and played on these amplifiers. ZONE2 MAIN ZONE AVR-4810CI L "69
*/ R ZONE3 L R "69
*/ Also be sure to read the operating instructions of the connected devices. NOTE • We recommend using high quality pin-plug cables for audio connections in order to prevent noise. • When the input source to which the digital input connectors (OPTICAL/COAXIAL) are assigned is selected in ZONE2 or ZONE3, playback is only possible if the digital signal being input is in PCM (2-channel) format. • It is not possible to play the digital audio signals input from the HDMI or DENON LINK terminals in ZONE2 and ZONE3. • When certain digital signals are being input, noise may be output from the ZONE2 and ZONE3 audio output connectors. • In ZONE4, it is not possible to select "XM", "HD Radio", or sources with no digital input signals ("TUNER", "PHONO", "iPod", etc.). Digital Audio Connections (ZONE4) • Connect audio from the ZONE4 OPTICAL OUT terminal on the AVR4810CI to the ZONE4 amp. • Use bitstream compatible amps in ZONE4. MAIN ZONE AVR-4810CI ZONE4 '- 48 '3 $ 4- 43 Video Output Video Connection The video signals of the AVR-4810CI's ZONE2 video output terminal are played by the ZONE2 monitor. MAIN ZONE AVR-4810CI ;0/& $0.10/&/5 7*%&0 7*%&0 */ $0.10/&/5 7*%&0 7*%&0 NOTE It is not possible to output video signals input to the HDMI to ZONE2. 105