Denon AVR4810CI Owners Manual - English - Page 56

Getting Started Connections Settings Playback Multi-zone Remote Control Information Troubleshooting Specifications OPTION Making Other Settings (Option Setup) Default settings are underlined. Setting items Setting contents Volume Control Volume Display : Set how volume is displayed. Set the MAIN ZONE volume • Relative : Display ---dB (Min), in the range -80 dB ~ 18 dB. setting. • Absolute : Display in the range 0 (Min) ~ 99. Setting items GUI (Continued) • The "Volume Display" setting is applied also to the "Volume Limit" and "Power On Level" display method. • The "Volume Display" setting applies to all zones. Volume Limit : Make a setting for maximum volume • OFF : Do not set a maximum volume. • -20dB (61) / -10dB (71) / 0dB (81) Power On Level : Define the volume setting that is active when the power is turned on. • Last : Use the memorized setting from the last session. • - - - (0) : Always use the muting on condition when power is turned on. • -80dB ~ 18dB (1 ~ 99) : The volume is adjusted to the set level. Mute Level : Set the amount of attenuation when muting is on. • Full : The sound is muted entirely. • -40dB : The sound is attenuated by 40 dB down. • -20dB : The sound is attenuated by 20 dB down. Source Delete PHONO / CD / DVD / HDP / TV / SAT/CBL / VCR / DVR / V.AUX / Remove input sources NET/USB / TUNER / XM / SIRIUS / HD Radio : Select input source that that are not used from the is not used. display. • ON : Use this source. • Delete : Do not use this source. NOTE GUI Make GUI related settings. • Input sources being used in the various zones cannot be deleted. • Input sources set to "Delete" cannot be selected using SOURCE SELECT. Screensaver : Make screensaver settings. • ON : The screen saver is activated during GUI menu display or NET/USB / iPod / TUNER / XM / SIRIUS / HD Radio screen display if no operation is performed approximately for a continuous 3-minute period. When you press uio p, the screen saver is cancelled and the screen before that screen saver started is displayed. • OFF : Screen saver is not activated. Making Detailed Settings (Manual Setup) Setting contents Wall Paper : Set wallpaper to display the background when playback is stopped, etc. • Picture : Set the background to a picture (DENON logo). • Black : Set the background to black. • Gray : Set the background to gray. • Blue : Set the background to blue. Format : Set the video signal format to be output for the TV you are using. • NTSC : Select NTSC output. • PAL : Select PAL output. The "Format" can also be set by the following procedure. However, the GUI screen is not displayed. 1. P ress and hold the main unit's DSX and RETURN for at least 3 seconds. "Video Format" appears on the display. 2. Press o p and set the video signal format. 3. P ress the main unit's ENTER, MENU or RETURN to complete the setting. NOTE When a format other than the video format of the connected TV is set, the picture will not be displayed properly. Text : Display the content of operation during switching of surround mode, input mode, etc. • ON : Turn display on. • OFF : Turn display off. Master Volume : Master volume display during adjustment. • Bottom : Display at the bottom. • Top : Display at the top. • OFF : Turn display off. When the master volume display is hard to see when superimposed on movie subtitles, set to "Top". NET/USB : Set the NET/USB screen display time when the input source is "NET/USB". • Always : Show display continuously. • 30s : Show display for 30 seconds after operation. • 10s : Show display for 10 seconds after operation. • OFF : Turn display off. Main remote control unit operation buttons :Displaying the menu Cancel the menu :Moves the cursor (Up/Down/Left/Right) :Confirm the setting See overleaf :Return to previous menu 53