Denon AVR4810CI Owners Manual - English - Page 49

Getting Started Connections Settings Playback Multi-zone Remote Control Information Troubleshooting Specifications Making Detailed Settings (Manual Setup) Making the Network Settings (Network Setup) Default settings are underlined. Make network settings. Setting items Setting contents Network Connecting Wireless LAN settings Make settings for wired or Use this procedure to configure the Wireless LAN settings. wireless LAN. 1. F itting a rod antenna (vpage 26 "Connecting to a Home Network (LAN)"). b If a LAN cable is connected, remove it. 2. T urn on the AVR-4810CI (vpage 28 "Turning the Power On"). 3. S et the access point at the "Network Connecting". When searching access points to connect automatically, refer to "Automatic settings". When searching access points to connect manually, refer to "Manual settings". n Automatic settings NETWORK CONNECTING Select a connection method appropriate for your wireless LAN host Setting items Network Connecting (Continued) Search q WPS Manual Enter RETURN Cancel Search and set the access point NETWORK CONNECTING w Please select access point to connect. DENON WEP 82% Search Enter Select access point to connect RETURN Cancel q On the GUI menu, select "Network Connecting" - "Search" and press ENTER. The access point you have set is displayed. w Use ui to select the access point, and then press ENTER. The DHCP function is disabled. Setting contents b If the access points are repeat search, use i to select the "Search" and press ENTER. NETWORK CONNECTING Please select access point to connect. DENON WEP 82% Search Select Enter Select access point to connect RETURN Cancel e If there is an encryption setting for the access point you selected in step w, enter same encryption key as used for the access point. (If there is no encryption setting, proceed to step t.) NETWORK CONNECTING Enter same encryption key (security) key as used for access point e WEP Key Default Key Connection AAAAA 1 r t Enter encryption key Enter RETURN Cancel Use uio p to input the "Key" (encryption key) and press ENTER. Enter the same encryption key as used for the access point. The types of characters that can be input are as shown below. GLower case charactersH abcdefghijklmnopqrstuvwxyz GUpper case charactersH ABCDEFGHIJKLMNOPQRSTUVWXYZ GSymbolsH GNumbersH 0123456789 (Space)  • You can change the character type when you press SEARCH on the main remote control unit or MENU during character input. • When no security settings have been used in the Internet connection settings, this step is not necessary. r When encryption is by "WEP", select the "Default Key" using i, and then press o p. 1 / 2 / 3 / 4 : Select the same default key as used for the access point. This should normally be set to "1". 46 Main remote control unit operation buttons :Displaying the menu Cancel the menu :Moves the cursor (Up/Down/Left/Right) :Confirm the setting :Return to previous menu