Denon AVR4810CI Owners Manual - English - Page 55
Making the Multi-zone Settings Zone Setup
UPC - 883795001151
View all Denon AVR4810CI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Getting Started Connections Settings Playback Multi-zone Remote Control Information Troubleshooting Specifications Making Detailed Settings (Manual Setup) Making the Multi-zone Settings (Zone Setup) Default settings are underlined. Set the audio to playback with multi-zone (ZONE2, ZONE3). Setting items Setting contents Bass -10dB ~ +10dB (0dB) Adjust low frequency range (bass). Treble -10dB ~ +10dB (0dB) Adjust high frequency range (treble). HPF OFF : The low range is not attenuated. Make settings for cutting ON : The low range is attenuated. the low range to reduce distortion in the bass. Lch Level -12dB ~ +12dB (0dB) Adjust the left channel output level. The "Lch Level" can be set when "Channel" (vpage 52) is set to "Stereo". Rch Level -12dB ~ +12dB (0dB) Adjust the right channel output level. The "Rch Level" can be set when "Channel" (vpage 52) is set to "Stereo". Channel Stereo : Select stereo output. Set the signal output from Mono : Select mono output. multi-zone. When "Amp Assign" - "Assign Mode" (vpage 41) is set to "FREE", and the signal assigned to the power amp is set to "Z2/Z3(M)", the "Channel" setting automatically becomes "Mono". Volume Display Relative : Display - - - dB (Min), in the range -80 dB ~ 18 dB. Set how volume is Absolute : Display in the range 0 (Min) ~ 99. displayed. • The "Volume Display" setting is applied also to the "Volume Level", "Volume Limit" and "Power On Level" display method. • The "Volume Display" setting applies to all zones. Setting items Setting contents Volume Level Variable : Volume adjustment enabled by main unit and remote control Set the volume output level. unit. -40dB (41) : Fix volume at -40 dB. Set when adjusting volume by external amplifier. 0dB (81) : Fix volume at 0 dB. Set when adjusting volume by external amplifier. When "Amp Assign" - "Assign Mode" (vpage 41) is set to "+Z2", "+Z2+Z3", "ALL Z2" or "ALL Z2+Z3", the "Volume Level" setting is automatically set to "Variable". Volume Limit OFF : Do not set a maximum volume. Make a setting for maximum -20dB (61) / -10dB (71) / 0dB (81) volume. Can be set when the multi-zone "Volume Level" setting (vpage 52) is "Variable". Power On Level Last : Use the memorized setting from the last session. Define the volume setting - - - (0) : Always use the muting on condition when power is turned on. that is active when the -80dB ~ 18dB (1 ~ 99) : The volume is adjusted to the set level. power is turned on. Can be set when the multi-zone "Volume Level" setting (vpage 52) is "Variable". Mute Level Full : The sound is muted entirely. Set the amount of attenuation -40dB : The sound is attenuated by 40 dB down. when muting is on. -20dB : The sound is attenuated by 20 dB down. 52 Main remote control unit operation buttons :Displaying the menu Cancel the menu :Moves the cursor (Up/Down/Left/Right) :Confirm the setting :Return to previous menu