Denon DND6000 Operating Instructions - Page 12

ENGLISH Relay playback 6 NEXT TRACK • Relay Play function is a playback mode to continue play tracks of CD1 and CD2 in DN-D6000. • It's now possible to select the beginning of the next track to be played while continuing playback of the current track without interrupting playback. *Crossfade can also be used for a smooth transition. RELAY PLAY ON q When "Relay. ON" is selected for ⁄5 PRESET "(14) Relay Mode" and playback starts, RELAY PLAY starts. • If RELAY MODE is selected with PRESET of one side. RELAY PLAY will be operated with CD1 and CD2. • When RELAY MODE is selected, "SINGLE" or "CONT." display flashes. • In the single play mode, when the one player's playback reaches end of track, 1 another player starts playing. • In the continuous play mode, when the whole tracks on one side are finished, another player starts. • The discs in CD1 and CD2 can be played alternately. ✽ The CD1 and CD2 can be played overlapping. The overlap playback time can be selected at ⁄5 PRESET "(2) Next Track". RELAY PLAY OFF w Stop playback and select "Relay. OFF" is 2 selected for ⁄5 PRESET "(14) Relay Mode". q re t Enter Next Track mode q When the NEXT TR./B TRIM button is pushed during playback, the NEXT TRACK function is turned on. • When this mode is set, CUE button blink. 1 • When the button is pushed again, the NEXT TRACK mode is turned off. • However, when seamless loop point B is set, the point B trim mode is selected. In this case press the button again to turn the trim mode off. w Select the MEMO e The CUE point of MEMO can be selected as NEXT TRACK. • When the NEXT TRACK with which MEMO is memorized is selected, "MEMO" is displayed on the character display. • If the MEMO button is pushed at this time, the CUE point is memorized as the NEXT TRACK & point to be selected. • The MEMO will be canceled if another 2-2 track is selected by PARAMETERS knob or the MEMO button is pushed again. Select the track w Turn the PARAMETERS knob and select for the next track to be played. 2-1 Track search start r When the CUE button is pushed after selecting the track, current playback continues as the next track is searched for and the standby mode is set. When the standby mode is set, the CUE button lights up and the PLAY/PAUSE button flashes. • During this time, if a loop of 8 seconds or less is actively looping, it will continue to loop until PLAY is ultimately pressed. If a loop is over 8 sec, you must first 3 EXIT from the loop in order to enter Next Tr mode. • The time display indicates the remaining playback time for data in the memory after CUE is pressed. NOTE: The amount of time for which playback of the currently continuing track can be continued is a maximum of 10 seconds from the time searching for the next track starts. Next Track playback start t When the PLAY/PAUSE button is pushed, the current playback is stopped and playback of the next track starts. ✽ The currently playing track can be faded out when starting to play a different track. The fade out time can be selected 4 at ⁄5 PRESET "(2) Next Track". • If the PLAY/PAUSE button is not pushed after standing by at the next track, when in the CONT. playback mode, playback of the next track starts once all of the currently playing playback data has been played. The same goes for SINGLE playback mode. 12