Denon DND6000 Operating Instructions - Page 14

ENGLISH 8 SEAMLESS LOOP/HOT START/STUTTER Seamless Loop/Hot Start/Stutter (A1, A2 buttons) q, w, y r t, y e, y Operation display (refer to the section describing the display) Setting the A point (loading the Hot Start data) q Push the A1 or A2 button to set the A point and Hot Start data loading starts. • A1 and A2 buttons can be 1 used separately for each Hot Start. • When an A point is set, the corresponding A button and " " display light and that button is set to the Hot Start mode. • The BPM is set independently for each Hot Start automatically. Starts Hot Start w When A1 or A2 button is 2 pushed, Hot Start playback starts from the corresponding A point. Setting the B point for Seamless Loop e When the B button is pushed after setting the A 3-1 point or after starting Hot start playback, the B point is set and Seamless Loop playback starts from the A point. • The B button works with respect to the A point operated before the B button 3-1 was pushed. • If the B button is pushed during Seamless Loop playback or after EXIT playback, the B point moves to the point at which the button was pushed. 3-2 • When the B point is set, the B and " " displays light. Playing Seamless Loops • When the B point for A1 is detected after playback started from A1 point, playback returns to A1 point with seamless. While A1 to B looping, B point for A2 ignored. 4 • When the B point for A2 is detected after playback started from A2 point, playback returns to A2 point with seamless. While A2 to B looping, B point for A1 ignored. 14 Exit/Reloop r In Seamless Loop playback, you can force exit from or return to the loop. EXIT: While the Seamless Loop playback, push 5 the EXIT/RELOOP button to exit from loop. DN-D6000 continues playback after the B point. RELOOP: When the EXIT/RELOOP button is pushed after exit the loop, Seamless Loop playback resumes from the A point. Stutter • A1 and A2 points can be also used for Stutter playback. t To enable stutter playback, 6 push FLIP button for A1/A2 buttons, then " " display turns off. Press the FLIP button to switch between the Hot Start/Seamless Loop and Stutter modes. Clear the A1/A2 point y While pressing the FLIP/(CLR) button, push the A1 or A2 button to clear the corresponding A and B points. Or push the FLIP button for more than 1 sec to clear both A1 and A2 points at once. 7 Quickly pressing the "FLIP" button first and then A1 , A2 or B buttons will clear these points individually.