Denon DNHD2500 Operating Instructions - Page 11

ENGLISH (3) Display @1 @0 !9 !6 !8 !2 !7 !6 !5 !4 !3!2!1 !0 i BPM point display • Displayed when the BPM value of the "A1" or "A2" point is being calculated. o Visual Marker • This turns according to the playing status of the different decks. Use this as an indicator for scratching and other JOG operations. !0 Play Position indicators • Play position indicator: The 20 dots indicator a visual position marker during normal play. In the reverse play mode, the dots are inverted. • End of Message: When the file's end time is below the specified time, the lower section of the play position indicators flashes according to the file's remaining time (EOM), indicating the end of the file. ✽ The EOM time can be set in the presets. !1 Minute, second and frame displays • These displays indicate current position information. qw e rt q Loop mode indicators • DN-HD2500 has Loop mode indicators which consist of A , B and two arrows. A and B marks indicate A and B points have been set. • Two arrows indicate loop setting mode as follows. or Left arrow only on: Hot Start mode Both arrows on: Seamless Loop mode , Both arrows flashing: Seamless Loop Playing , Left arrow on, right flashing: Exit play from Seamless Loop w Pitch display • This indicator display the playback speed (pitch). e Navigation display • With the DN-HD2500, such operations as selecting the mode, etc., can be performed using the PARAMETERS knob following the instructions on the navigation display. The PARAMETER indicator flashes when it is possible to input using the PARAMETERS knob. yu io r KEY ADJ. indicator • KEY ADJ. indicator appears in display when the Key Adjust mode is ON. t MEMO indicator • MEMO indicator appears in display when there is a memo setting found for the current playing File/Playlist or the File/Playlist at which the Cue standby mode is currently set. y BPM indicators • Lights when the BPM is displayed on the pitch display. u Character display • You can select the mode or function using PARAMETERS knob following the short message which is displayed on the character display area. • The character display indicates the operation, mode name, data, etc., and displays such guide messages as "Push/Play" means if "YES", push PARAMETERS knob. The display indicates and marks sometime, note that mark says you to turn PARAMETERS knob and marks says to push PARAMETERS knob. • The PARAMETER indicator flashes when you can use PARAMETERS knob, otherwise this knob used for File Selection. !2 Time mode indicators • When the TIME button is pushed, the Time mode indicator switches as follows: ELAPSED: File's elapsed time is displayed. REMAIN: File's remaining time is displayed. T. ELAPSED: The total elapsed time of Playlist is displayed. T. REMAIN: The total remaining time of Playlist is displayed. !3 Device display • This displays the device currently selected for the different decks. !4 Keyboard connection indicator • This lights when a keyboard is connected. !5 Mode display • Upper section: Displays the current mode of the different decks. • Lower section: Displays the current playlist name, artist name, etc., for the different decks. !6 Play mode indicators • When SINGLE indicator lights up, playback will finish at end of current file. • When CONT. indicator lights up, playback continues. 6 ENGLISH !7 Database Creation indicator • This lights when a database is being created. !8 External device connection confirmation indicator • This flashes when an external device is connected. When flashing, press the SOURCE button to select the device. (The indicator does not flash when a keyboard is connected.) !9 HDD indicator • This lights when the HDD is being accessed. @0 Track indicator • When in the playlist playback mode for the different decks, the track at which the play, pause or cue mode is set is displayed here. Nothing is displayed when in the file playback mode. @1 File data indicator • This indicates the currently selected file format ("WAV" or "MP3") for the different decks. When the currently selected file format is "MP3", the bit rate, etc., is also displayed.